HOME SET UP menu
Key | Key designation | Description |
| ||
|
|
|
F11 | PREROLL | After pressing the F11 key, turn the ADJUST control. |
| For selecting the preroll | Selection can be made between 0 and 30 seconds. (Initial |
| time. | setting is 5 seconds.) |
F12 | STILL | Sets the stop/still (still picture) mode holding time. |
| For setting the | In order to protect the tape, the VTR is automatically transferred |
| STOP/STILL (static frame) | to the tape tension release mode (loosing) after a specific time |
| mode holding time. | has elapsed. This specific time can be set. |
|
| After pressing the F12 key, turn the ADJUST control. |
|
| 1 sec, 3 sec, 30 sec, 1 min, 3 min or 5 min can be set as the |
|
| holding time. |
|
| When the stop/still mode holding time is set to 5 min, the STILL |
|
| STEP ON/OFF function can be selected. |
For details, refer to F2 (STILL STEP) key of the OPERATION
ENGINEER SET UP menu on page 145.
F13 STBY OFF
For setting the time for the transfer to standbay OFF.
For setting the time for the transfer from tape loosing to standby OFF.
After pressing the F13 key, turn the ADJUST control.
1 sec, 3 sec, 30 sec, 1 min, 3 min, 16 min and ¶ [Infinity: No transfer to standby OFF mode (drum stop/half loading)] can be set.
– 19 –