VIDEO OUT SD SET UP SDI menu
Key | Key designation | Description | |
F1 | COMB FIL° | For selecting whether to pass the SD output (both of SDI output | |
|
| and analog composite output) signals through the comb filter. | |
|
| ON: The signals are passed through the comb filter and output. | |
|
| OFF: The signals are not passed through the comb filter. | |
F2 | B. CLIP | This is used to select whether signals below the SD output | |
|
| pedestal level are to be clipped or not. | |
|
| OFF: The signals are not clipped. | |
|
| ON: The signals are clipped. |
|
|
|
|
|
|
| ||
|
|
| |
F5 | SERIAL SYS PHASE | Adjusts the sync phase of SD_SDI output in relation to the | |
F6 |
| reference signal. |
|
|
| FINE/COARSE |
|
|
| ≥This can be selected when the function key is pressed together | |
|
| with the F key. |
|
|
| With the 480/59.94i format: | Adjustment can be made from |
|
|
| |
|
| With the 480/59.94p format: | Adjustment can be made from |
|
|
| j857 to +858. |
|
| With the 576/50i format: | Adjustment can be made from |
|
|
| |
|
| For FINE, adjustments are made in sample increments; for | |
|
| COARSE, they are made in H increments. | |
F7 | INTERP. | Initiates vertical interpolation during AT playback to reduce the | |
| Interpolation | vertical movement of the playback images. | |
|
| AUTO: Automatically initiates interpolation in the JOG or VAR | |
|
| mode. |
|
|
| OFF: No interpolation. |
|
|
|
| |
F8 | EXIT | Returns the VTR to the VIDEO OUT SD menu screen. | |
|
|
|
|
|
| ||
F11 | LINE BLK | For transferring to the video output line blanking menu. | |
|
| NTSC: Lines 10 to 21. |
|
|
| PAL: Lines 8 to 22. |
|
|
|
| |
F12 | STATE | Transfers the VTR to the VIDEO OUT SD SET UP SDI STATE | |
|
| menu screen. |
|
|
|
|
|
F13 |
|
| |
°This item does not appear when 525p (480/59p) is set for the SD SDI output. Similarly, it does not appear when 1080/50i, 625/50i, 1080/25psf or 1080/25p is the system format. (The output signals are not passed through the comb filter.)
– 37 –