VIDEO OUT SD SET UP CMPST STATE menu
∑Selecting the TAPE/EE output signals
The video, audio and cue signals which are output during the VTR’s operation are switched on this menu to TAPE or EE signals.
(1)Press the center cursor key to display the cursor. Center cursor key
Cursor key
(2)Move the cursor to the desired position using the cursor keys. °The cursor will not move to places which cannot be set.
(3)Press the center cursor key to select TAPE or EE.
Refer to the following table for the types of setting options.
Mode | EJECT | STBY | TENSION | STBY | REC | EDIT | JOG/ | SHTL |
CH |
| OFF | RELEASE | ON |
| REC | VAR |
|
VIDEO | FREEZE | FREEZE | FREEZE | TAPE | TAPE | TAPE | TAPE | TAPE |
| BLACK | BLACK | BLACK | EE1 | EE1 | EE1 |
|
|
| GRAY | GRAY | GRAY | EE2 | EE2 |
|
|
|
| FREE | FREE | FREE |
|
|
|
|
|
| NOISE | NOISE | NOISE |
|
|
|
|
|
| EE1 | EE1 | EE1 |
|
|
|
|
|
| EE2 | EE2 | EE2 |
|
|
|
|
|
D.AUDIO | MUTE | MUTE | MUTE | MUTE | TAPE | TAPE | TAPE | TAPE |
| EE1 | EE1 | EE1 | EE1 | EE1 | EE1 | MUTE | MUTE |
| EE2 | EE2 | EE2 | EE2 | EE2 |
|
|
|
CUE | TAPE | TAPE | TAPE | TAPE | EE | EE | TAPE | TAPE |
| EE | EE | EE | EE |
|
|
|
|
(Underline denotes the factory setting mode.)
≥When a setting is to be established during head selection using the TEST menu or during edit- ing, the setting applying to the operation concerned takes precedence over the setting selected using the VIDEO OUT SET UP STATE menu.
≥When TAPE/EE has been set by F1 (OUTPUT) on the HOME menu, the HOME menu setting takes precedence.
– 35 –