VIDEO OUT SD SET UP COMPOSITE menu

Key

Key designation

Description

F1

COMB FIL°

Selects whether the analog composite output signals are to be

 

For controlling the comb

passed through the comb filter. However, when the F1 (COMB

 

filter.

FIL) key on the VIDEO OUT SD SET UP SDI menu has been set

 

 

to ON, the analog composite output will also be set to ON

 

 

regardless of which setting is selected for this menu item.

 

 

ON: The signals are passed through the filter and output.

 

 

OFF: The signals are not passed through the filter.

F2

B. CLIP

This is used to select whether signals below the SD output

 

 

pedestal level are to be clipped or not.

 

 

OFF: The signals are not clipped.

 

 

ON: The signals are clipped.

 

 

 

F3–F4

——

 

 

 

 

F5

SYS SC

Adjusts the system subcarrier of the composite output.

 

For adjusting the system

(j180 to i180)

 

subcarrier.

When this key is pressed together with the F key, the white-on-

 

 

black display (VAR MODE) is established, and the system

 

 

subcarrier can be adjusted using the ADJUST control.

F6

SYS H

 

For adjusting the system H

 

phase.

Adjusts the system H phase of the composite output. Adjusts the system H phase of the composite output.

When this key is pressed together with the F key, the white-on- black display (VAR MODE) is established, and the system H phase can be adjusted using the ADJUST control.

The system H phase is adjusted in sample increments. n0.5H j858 to i858 (with 480/59.94i format)

j864 to i864 (with 576/50i format)

F7

INTERP.

Initiates vertical interpolation during AT playback to reduce the

 

Interpolation

vertical movement of the playback images.

 

 

AUTO: Automatically initiates interpolation in the JOG or VAR

 

 

mode.

 

 

OFF: No interpolation.

 

 

 

F8

EXIT

Returns the VTR to the VIDEO OUT SD menu screen.

F9

——

 

 

 

 

F10

7.5%STUP

Selects whether to add 7.5% setup to the composite output.

 

For adding 7.5% setup to

(This setting takes effect with NTSC output signals only; This

 

the composite output.

setting is not displayed with PAL output signals.)

 

 

ON: 7.5% setup is added.

 

 

OFF: 7.5% setup is not added.

 

 

 

F11

LINE BLK

For transferring to the video output line blanking menu.

 

 

NTSC: Lines 10 to 21.

 

 

PAL: Lines 8 to 22.

F12

STATE

Transfers the VTR to the VIDEO OUT SD SET UP CMPST

 

 

STATE menu screen.

 

 

 

F13

——

 

 

 

 

°This item does not appear with the 1080/50i, 625/50i, 1080/25psf and 1080/25p system formats. (PAL output sig- nals are not passed through the filter.)

– 33 –