-5-

• On wall or ceiling

You can install the speaker on a wall or ceiling with a
mounting bracket (not supplied).
qPlace the bracket on the enclosure.
wScrew the eye bolts into the screw holes of the
enclosure by hand.
eFix the speaker to a wall or ceiling.
rTake safety protections mentioned in “Secure the
speaker.”
Note: Installers should seek advice on the building
structure and load capacity, if unknown, from
an architect or a structural engineer.

• Secure the Speaker

Use safety wires (not supplied) when hanging the
speaker from a wall or ceiling. This is not a major
means of support but just a safety relief.
qTighten the eye bolts with washers and bolt nuts
(not supplied) into the screw holes of the enclosure
by hand.
wSet the direction of the eye bolts to be in the best
position for binding safety wires.
eFasten the bolt nuts with wrench.
rBind one end of safety wires to the eye bolts.
tSecure the other end of safety wires to the support-
ing structure of the building.

• Mounting on a stand

1. You can mount the speaker on a speaker stand by
using the stand hole in the enclosure bottom.
2. The stand should have a supporting pipe of ø1.5
inches.
3. Take safety protections by placing it in a safety
location, for exemple.
INSTALLING THE SPEAKER
Eye Bolt
Washer
Set direction
Bolt nut
Tighten with wrench
Hand
tighten
Hand
tighten
Insert
Mounting
bracket
Stand hole
(Bottom side)