-2-

■FRONT VIEW

1. Power On/Off Switch (POWER ON/OFF)
This switch turns the power of the monitor on and
off.
Press this switch once to turn (switch down ;) the
power of the monitor on.
Press again (switch up l) for turn the power of the
monitor off.
2. Power Indicator
This indicator lights to indicate that the power is on.
3. Scan Size Selection Switch (SCAN SIZE, UNDER/
NORMAL)
This switch is used for selecting the scan size.
Press once (switch down ;) to select the Under
Scan mode.
Press again (switch up l) to select the Normal
Scan mode.
4. Horizontal Hold Control (H. HOLD)
This control is used to lock the horizontal position of
the picture.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
POWER
SCAN
SIZE
V.HOLD
HEIGHT
NORMAL
UNDER
OFF
ON
BRIGHT CONTRAST
H.HOLD V.LIN
Video Monitor WV-BM
5. Vertical Hold Control (V. HOLD)
This control is used to lock the vertical position of
the picture.
6. Height Control (HEIGHT)
This control is used to adjust the height of the
picture.
7. Bright Control (BRIGHT)
Turn this control clockwise to increase the picture
brightness.
Turn this control counterclockwise to decrease the
picture brightness.
8. Vertical Linearity Control (V. LIN)
This control is used to correct the vertical
nonlinearities in the picture.
9. Contrast Control (CONTRAST)
Turn this control clockwise to increase the picture
contrast.
Turn this control counterclockwise to decrease the
picture contrast.