qAlarm Indicator (ALARM)

Blinks to indicate that an alarm condition exists.

It changes to steady light when the alarm is reset auto- matically.

To turn the indicator off, press the ACK RESET button.

wBusy Indicator (BUSY)

Lights up when you attempt to control a monitor or a camera that is already used by a higher priority opera- tor, or when the higher priority operator selects the monitor or camera you are currently operating.

Operations from the System Controller are disabled until this indicator goes off.

eFunction Buttons (F1/F2/F3/F4)

Select functions displayed on the LCD (Liquid Crystal Display) display.

rLCD (Liquid Crystal Display) Display

Displays function menus, numeric input, and system status.

tDirection Buttons (A, B, D, C)

Select a function menu for display on the LCD display.

yZoom Wheel Controller

This control is used for zooming cameras equipped with the specified lens. Moving the control to the right will zoom in the image. Moving the control to the left will zoom out the image.

uJoystick Controller (UP/DOWN/LEFT/RIGHT)

The joystick is used to manually operate the Pan/Tilt Head, or move the cursor in the Matrix Switcher’s Setup Menu on the active monitor screen.

iTop Button

Pressing this button will automatically set the lens focus of a specified camera.

oIris Control Buttons (IRIS CLOSE, OPEN)

Close or open the lens iris of cameras equipped with the specified lens.

When these buttons are pressed at the sometime for 3 seconds or more, the lens iris is reset to the factory default setting.

!0Focus Control (FOCUS NEAR/FAR)

Adjust the lens focus of cameras equipped with the specified lens.

!1Zoom Control (ZOOM TELE/WIDE)

This control is used for zooming cameras equipped with the specified lens.

!2Preset Button (PRESET)

Auto Focus Button (AF)

PRESET: This button, in combination with the Numeric keys, is used to move the selected camera to a pre- set position in a system equipped with the specified cameras.

AF: Pressing this button will automatically set the lens focus of a specified camera.

!3Camera (Set) Key [CAM (SET)]

CAM: Used for camera selection. To select a camera, enter the desired camera number with the Numeric keys, and then press the CAM key.

SET: This key, in combination with the Numeric keys, is used to enter numeric input, such as operator ID and password.

It is also used to execute the currently highlighted selection and to enter a submenu in the Setup Menu of the Matrix Switcher.

!4Numeric Keys (0 to 9)

These keys are used for numeric input into the system, such as the camera and monitor number, sequence number, preset position, etc.

!5Monitor (Escape) Key [MON (ESC)]

MON: This key is used to select a monitor.

To select a monitor, press the corresponding Numeric keys, followed by the MON key.

ESC: This key is used to escape from the currently highlighted selection on the Setup Menu of the Matrix Switcher.

Pressing this key, while the Alternate (ALT) indicator is on, will display the video that is connected to the Monitor Input (MONITOR IN) Connector on the WV- PB5504A Video Output Board.

!6Stop/Slow Button (STOP/SLOW)

STOP: Pauses a sequence that is being run on the active monitor.

SLOW: For fine pan/tilt control, move the joystick while holding down the SLOW button.

!7Increment Button (INC +1CAM)

When a sequence running in forward direction has been paused with the STOP button, pressing this button will move the sequence one frame to the next step (in forward run direction). If the sequence was running in reverse direction, the button will move the sequence one frame to the next step (in reverse run direction).

This button is also used to select a camera. Pressing this button will replace the currently selected camera with the next higher camera number, if the active moni- tor is in Spot mode.

7

Page 6 Page 8
Page 7
Image 7
Panasonic WV-CU550CJ manual Function Buttons F1/F2/F3/F4
Page 6 Page 8

WV-CU550CJ specifications

The Panasonic WV-CU550CJ is a cutting-edge controller designed for efficient management and operation of video surveillance systems. This device is highly regarded for its user-friendly interface, which simplifies the management of various CCTV cameras and components.

One of the main features of the WV-CU550CJ is its ergonomic design, facilitating ease of use during extended periods. The controller is equipped with a joystick that offers precise control over camera movements, allowing users to pan, tilt, and zoom (PTZ) with remarkable accuracy. This functionality is essential for monitoring large areas and ensuring that no critical activity goes unnoticed.

The WV-CU550CJ supports a variety of communication protocols, including Pelco D and Pelco P, which makes it compatible with a wide range of CCTV equipment. This versatility not only enhances its functionality but also enables seamless integration into existing surveillance systems. The controller can manage up to 256 cameras, accommodating the needs of larger installations in various sectors such as transportation, retail, and public safety.

In terms of technologies, the WV-CU550CJ incorporates advanced digital signal processing to ensure high-quality video transmission. Users can monitor multiple cameras simultaneously, and the device supports programmable presets, which allow for automatic movements to predefined positions. This feature is particularly useful for covering critical zones, as it reduces the operator's workload while maintaining surveillance efficacy.

Additionally, the WV-CU550CJ includes built-in functionality for managing alarm inputs and outputs, providing an extra layer of security by allowing the controller to react to specific triggers, such as motion detection. The device's compact form factor makes it suitable for desk-mounted or rack-mounted setups, catering to different operational environments.

Equipped with a comprehensive manual and intuitive layout, the WV-CU550CJ is designed to minimize the learning curve for new users while ensuring operational efficiency for experienced professionals. The combination of robust features, compatibility, and ease of use positions the Panasonic WV-CU550CJ as an essential asset in modern surveillance systems, ensuring enhanced security and peace of mind for users.
Top Page Image Contents