![](/images/new-backgrounds/1249040/2490403x1.webp)
This new Super Dynamic III colour dome cameras integrate a weatherproof housing, 360°
Innovative Features Set a New Standard in Reliability
Through exclusive Panasonic high performance features like Pixel Based 160x Dynamic Range, unprecedented image realism is achieved. Moreover, new intelligent functions, including Auto Image Stabilizer, Scene Change Detection, and Auto Tracking, deliver outstanding reliability in outdoor surveillance.
The
For All-Weather Outdoor Use
Rain Resistant
The
30x Optical Zoom (300x with digital zoom)
The standard 30x optical zoom lens on the
Up to
300x
zoom
0.065°/sec. Super Fine Pan Control
Our proprietary control chip, brushless DC motor, and microprocessor with optimized speed profile give you super fine 0.065°/sec. pan control. Combined with high-
performance zoom, it permits smooth tracking and captures moving subjects.
ConventionalConventional
Auto Image Stabilizer Removes Blurring
Automatic image stabilization prevents blurring when high winds or vibration from
aircraft, trains, or trucks affect cameras.
Conventional |
Scene Change Detection Pinpoints Interference
For example, if the camera has been tampered with by a manual change in its angle, removal of the lens, defocusing, or blocking the
lens with cloth
or paint, thisAlarmAlarm feature detects
the interference and sends an alarm.
SprayedDefocused
Ready for Temperature Changes
The housings
Shielded against the Sun
Super Dynamic III Function
Powerful Pixel Based 160x Dynamic Range
Conventional |
Auto Tracking
Using the auto tracking feature, the camera follows the largest movement in the image, automatically. The camera will pan and tilt to keep the subject in the centre of the image.
|
|
|
Quickly capture a subject, thanks to a |
|
|
maximum 400°/sec. panning speed. | 400°/s rotation | 360° monitoring |
The surveillance range is 360° horizontally (endless panning) and 190° vertically.
190° in one motion
Maximum 256 Preset Positions
Press a key on the controller to select preset positions.
Handy Features for More Efficient Surveillance
makes this the ideal surveillance solution for ATMs, entrances, and
Image Hold Eliminates Screen Blurring
The Image Hold function stores and displays the image immediately before
Patrol Learn Stores/Reproduces Manual Operations
Perform a camera operation such as panning or zooming once, then,
Conventional | Super Dynamic III |
Image may be marred by black spots or | Pixel based 160x dynamic range |
halos, depending on subject position. | reproduces every subject. |
540 TV lines Horizontal Resolution Captures the Details
Optimized filtering and broadband digital signal processing developed for the Super Dynamic III DSP deliver the finest details, with 540 TV lines of horizontal resolution in colour (typical) and 570 TV lines in B/W.
Automatic Switching to B/W for Night Surveillance
For optimal surveillance, day and night, the camera automatically switches to B/W mode, for greater sensitivity, when darkness falls. In daylight, it automatically switches to colour mode. Mode selection can also be set to manual operation.
Colour mode for daylight | B/W mode for |
Day/Night switching
Minimum Illumination of 0.04 lux in B/W Mode
Capture a clear surveillance image even in poor light. Minimum illumination needed is only 0.5 lux in colour and 0.04 lux in B/W mode, with pix sens up off, sens up off (AGC high).
the position selection until selection of preset positions is complete.
This function eliminates the screen blurring that occurs during panning with conventional cameras, for clear,
Digital Flip
When the camera pans 135° | Image | |
on monitor | ||
vertically, the top and bottom of the |
| |
image can be digitally reversed. |
| |
A subject passing directly under the | Position | |
camera can be continuously tracked | ||
of subject | ||
as the camera continues its 180° pan. |
|
Privacy Zone Masking
Mask any portion of the surveillance image on screen to prevent privacy infringement.
(Gray and mosaic masking supported.)
Motion Detector
When movement is detected within the surveillance area, the motion detector sends
with Patrol Learn, reproduce it at the flip of a switch.
Text Display of Camera IDs
Show an identifying name for each camera on the monitor, up to 16 characters and symbols.
Alarm Inputs/Outputs for External Device Control
With 4 alarm inputs and 2 alarm outputs on the output connector, each alarm signal can operate under preset positions and zooms. Alarm signals can also control DVR, VTR, or other external recording devices.
Ready to Use with One Coaxial Cable or RS-485
Transmits video image signals, control data, synchronization signals (VD2), and alarm signals over one coaxial cable up to 1,200 m long. The system also supports
Multiple Setup Languages
System set up in eight languages: English, German, French, Spanish, Italian, Russian, Chinese, and Japanese.
Enhanced Processing for Natural Colour | Auto Focus |
To deliver natural colour in its full range, new digital colour circuitry in the DSP | |
processes colour in finer detail, for reproduction of pale or dimly lit colours. | what you see is always in sharp focus. |
an alarm to external devices. Connection to a VTR or DVR recording system is also possible.
The above photographs were taken for the purpose of this explanation; actual performance and images may vary depending on environmental or other conditions.