Panduit PA24849A01 manual Hdcrt, See Page 2 for additional kits available separately

HDCRT

PA24849A01 REV: 04 7-2005

FIBER OPTIC CONNECTOR REMOVAL TOOL

OPERATION INSTRUCTIONS

© Panduit Corp. 2005

FIGURE 1
	HDCRT
EXTENDED EFFECTORS
WITH ANTI-SNAG TIPS
	THUMB SCREWS FOR
	EFFECTOR
	REPLACEMENT
	(See Page 2)
HDCRT
Fiber Optic Connector
Removal Tool	ERGONOMIC GRIPS

•HDCRT can be used by either right or left handed operators

•HDCRT is supplied with LC Effector assembly and is used with LC Fiber Optic Connectors

(See Page 2 for additional kits (available separately)

WARNING: When using this tool (as with any tool) in a static sensitive area, the operator should use an industry approved, standard grounding wrist strap system.

OPERATION

1.Figure 1 above illustrates the HDCRT Fiber Optic Connector Removal Tool

2.The open effectors allow the operator to pass over fiber optic cabling that interferes with connector accessibility.

Website: www.panduit.com E-mail: cs@panduit.com

Technical Support:

888-506-5400, ext. 6914

Fax: 708-444-6993

Page: 1 of 2