21
22
8
19
FIGURE 3
1
6
STEP 3:
•Insert two 3 X 2” INSERT GUIDES (21) into the end of each of the ROLLER PAD SUPPORT (1) as shown in FIGURE 3.
•SECURELY assemble the SPRING PIN ASSEMBLY (22) to the ROLLER PAD SUPPORT (1). See FIGURE 3.
•Slide the two ROLLER PADS (8) onto the ROLLER PAD SUPPORT (1) using two STARLOCK COLLARS (19) as shown in FIGURE 3.
•Pull back the SPRING PIN and CAREFULLY slide the ROLLER PAD SUPPORT (1) over the REAR UPRIGHT
(6). as shown in FIGURE 3.
3/8 X 1” 9
14
FIGURE 4
18
12
6
STEP 4:
•SECURELY assemble on 3/8 X 1” BOLT (9), two 3/8” WASHERS (14), and one 3/8” LOCK NUT (12) into the top hole on the REAR UPRIGHT (6). See FIGURE 4.
•Insert one 3 X 2” END CAP (18) into the top of the REAR UPRIGHT (6) as shown in FIGURE 4.
7
