PARTS LIST
KEY | PART # | DESCRIPTION | QTY |
1 | 6416002 | LEG HOLD DOWN FRAME | 1 |
2 | 6125101 | ROLLER PAD SHAFT | 2 |
3 | 6194601 | ROLLER PAD | 4 |
|
|
|
|
KEY | PART # | DESCRIPTION | QTY |
4 | 3105401 | STARLOCK COLLAR | 4 |
5 | 6236701 | 2 | |
|
|
|
|
1
3
2
5
4
PIN STOP | UPRIGHT TUBE, |
| BENCH FRAME |
FIGURE 1
STEP 1:
*Insert two CAP END (5) into both ends of the LEG HOLD DOWN (1) as shown in figure 1.
*Assemble four ROLLER PAD (3) to the LEG HOLD DOWN (1) as shown, using two ROLLER PAD SHAFTS (2).
*Using rubber mallet or hammer gently tap the four STARLOCK COLLAR (4) to the ends of each ROLLER PAD SHAFT (2)
*To perform DECLINES or AB CRUNCHES, insert the LEG HOLD DOWN ASSEMBLY into the UPRIGHT TUBE of the BENCH FRAME as shown in FIGURE 1, and tighten in place using the THUMBSCREW. To adjust the SEAT PAD for the DECLINE position, pull out on the
4
