843101 POWERRACK ASSEMBLY INSTRUCTIONS
Slide four (4) 2 IN SQ COVEKCAPSover the en& of each UPRIGHTBASEWELDMENTas shown on drawing.
LOOSELYassemble the LOWERCONNECTORWELDMENTbetween e~tch UPRIGIlT BASE WELDMENTas shown on drawing.
Insert twelve (12) 3 X 2 IN INSEKTGUIDESinto the ends of each SAFETYtrAIL WELDMENTand each BARSUPPORTWELDMENTas shown in (DETAIL A). NOTE: MAKESURE Tile INSERT GUIDESSNAP INTO Tile ilOLES OF THE WELDMENTS.
SECURELYassemble the six (6) SPRINGPIN ASSEMBLIESto the SPRINGPIN BARRELSon each SAFETYRAIL WELDMENTand each.BAR SUPPORTWELDMENTas shown in (DETAIL A).
Slide one (1) BARSUPPORTWELDMENTand one (I) SAFETYRAIL WELDMENT(IN ORDER)onto each UPRIGHTWELDMENTas shown on drawing.
Insert four (4) 2 IN SQENDCAPSinto the ends of the UPRIGHTWELDMENTas shownon drawing.
LOOSELYassemble each UPRIGHTWELDMENTto the UPRIGHTBASE WELDMENTSas shownon drawing.
LOOSELYassemble the UPPER CONNECTORWELDMENTand the CK[,~ BAR WELDMENT between the UPRIGHTWELDMENTSas shown on drawing.
9.Whenall componentsare assembled, SECURELYtighten all bolt connections.
Part# 6612301 | 3 | Revision:06/25/96 |
