ParaBody 848 manual 24 3/8 X 2-1/2

	2
	20	8	19
		11
	19
		9	23 3/8 X 2”
20	30
11	19
			24 3/8 X 2-1/2”
FIGURE 9

STEP 9:

•Route the end of the second CABLE (9) through the slot on the UPRIGHT (2) then SECURELY assemble one 3-1/2” PULLEY (11) to the UPRIGHT (2) using two 3/8 X 2-1/2” BOLTS (24), two 3/8 X 3/8” SPACERS (30), four 3/8” WASHERS (19), and two 3/8” LOCK NUTS (20). (NOTE: The CABLE (9) should be routed between the pulley and the retaining bolt as shown in FIGURE 9.)

•Loop the CABLE (9) around one 3-1/2” PULLEY (11) as shown in FIGURE 9.

•LOOSELY assemble the 3-1/2” PULLEY(11) to the 3/16 X 1-3/4 X 5-1/4” PLATES (8) using one 3/8 X 2” BOLT (23), two 3/8” WASHERS (19), and one 3/8” LOCK NUT (20). See FIGURE 9.

•SECURELY tighten the two 3/8 X 2” BOLTS (23) of the 3/16 X 1-3/4 X 5-1/4” PLATES (8).

11