867101 LAT OPTION ASSEMBLY INSTRUCTIONS
Slide the CARRIAGEdown over the LATUPRIGHTas showI1 on drawing. (MAKESU]~E THAT THE WEIGt~T PEG ON THE. CPJ~RL&GE IS FAC][NG TOWAP~STHE FRONT OF THE
MACHINE)
SECURELYassemble the UPRIGHTEXTENSIONto the top of the UPRIGHTFRAMEas shown in (DETAILB) using one (1) 1/2 X 3 IN. BOLT,the 3/4 X 1/2 X
10.LOOSELYassemble three (3)
11.LOOSELYassemble the two (2) PULLEYMOUNTFLATSto the LATUPRIGHT, and the UPRIGtITEXTENSIONas shown on drawing, using two (2) 3/8 X
WASHERS,and two (2) 3/8 IN. LOCKNUTS. (DO NOT TIGHTENTHE BOLT CONNECTIONS AT THIS TIME)
12.Loosen, remove, and discard the top 1/2 X
WASHERS,and file one 1/2 IN. LOCKNUT.
13..LOOSELYassemble one (1)
14.LOOSELYassemble two (2)
IN. LOCK NUTS. (TttIS CONNECTIONWILL BE TIGHTENED AFTER CABLE HAS BEEN
ROUTED)
15.Route the first CABLE(THE ENDWITHOUTWHITEBALL) over file HIGH PULLEYof the PULLEYMOUNTFLATS. Then assemble one (1) 3/8 X
Pull CABLEover and down the SECONDPULLEYof the PULLEYMOUNTFLATS. Rim the CABLEaround one of the PULLEYSassembled ~o the CONNECTORPLATESfrom STEP 14, and up to file THIRD PULLEYof the PULLEYMOUNTFLATS.
Pull CABLEover and down the THIRDPULLEY,to file CARRIAGEAttach. the CABLEtc, the CARRIAGE,using one (1) 5/16 IN. SNAPHOOIC
See CABLEROUTINGDIAGRAMfor help hi completing STEP 15.
5 | 04./1:;/97 |