FIGURE 5
STEP5:
A. Removethe BOLT& WASHERSbelow the PULLEYin upright. See FIGURE5,
B. Insert the threaded end of CABLE(part #6671001)under the PULLEYin UPRIGHTand around the bottom PULLEYof the PULLEYBLOCK.See FIGURE5.
C. Fasten end of CABLE(part #6671001) into threaded housing on the base of BENCHFRAME.
D. Tighten jam nut securely. | . |
E. Securely fasten previously removed BOLT& WASHER(NOTE:.The CABLE(part #6671001) should be routed over the bolt and washer.
5
