3. Slide the Management$%&Module Firmly$ into the Chassis. Tighten the fastening screws on the management module faceplate.
Installing Your Interface Module(s)
Interface modules provide the subscriber connections for a 4000E BLC; up to four interface modules may be installed in the 4000E (in slots 1–4). There are a variety of models available for purchase. Refer to www.paradyne.com for further information or contact your sales representative. Any combination of interface module models may be installed in an 4000E as long as they are supported by the model type and version number of your management module; refer to the Release Notes for your particular management module model.
CAUTION
If a blank plate is removed from slots 2–4, it must be replaced with an uplink module. DO NOT OPERATE A 4000E WITH AN EMPTY MODULE SLOT.
IPD4-A2-GZ40-00 | February 2005 | 7 |
