Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

3.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

4.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

5.General purpose cables are used with this product for connection to the network. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24 AWG line cord for connection to the Digital Subscriber Line (DSL) network.

6.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

7.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

8.Input power to this product must be provided by one of the following: (1) a UL Listed/CSA certified power source with a Class 2 or Limited Power Source (LPS) output for use in North America, or (2) a certified transformer, with a Safety Extra Low Voltage (SELV) output having a maximum 240 VA available, for use in the country of installation.

9.In addition, since the equipment is to be used with telecommunications circuits, take the following precautions:

ÐNever install telephone wiring during a lightning storm.

ÐNever install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

ÐNever touch uninsulated telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

ÐUse caution when installing or modifying telephone lines.

ÐAvoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

ÐDo not use the telephone to report a gas leak in the vicinity of the leak.

16

Page 16
Image 16
Paradyne 5216 installation instructions Important Safety Instructions

5216 specifications

The Paradyne 5216 is a high-performance multi-service access device designed to facilitate the seamless integration of multiple communication technologies within a single platform. As a vital component in today's rapidly evolving telecommunications landscape, the 5216 stands out for its flexibility and robust feature set, making it ideal for service providers and enterprises looking to enhance their network capabilities.

One of the main features of the Paradyne 5216 is its support for various connectivity options, including T1, E1, and SHDSL interfaces. This versatility allows users to connect a wide range of services and equipment, enabling efficient data transmission and communication. Additionally, the device offers integrated Ethernet capabilities, supporting both traditional and next-generation services, which is critical for meeting the demands of modern bandwidth-heavy applications.

The 5216 employs advanced technologies that enhance performance and reliability. For instance, it utilizes adaptive rate-shaping techniques to ensure optimal data flow, reducing latency and minimizing packet loss. This feature is particularly beneficial in environments where data traffic fluctuates, as it enables the device to dynamically adjust to changing conditions. Furthermore, the built-in error correction mechanisms improve overall communication integrity, ensuring that data is transmitted accurately.

Another defining characteristic of the Paradyne 5216 is its management capabilities. The device offers comprehensive monitoring and control through a user-friendly graphical interface, simplifying network administration. It supports standards-based protocols like SNMP, allowing for remote management and integration into various network management systems. This feature is crucial for service providers who need to ensure uptime and efficient resource allocation.

In terms of scalability, the 5216 is designed to grow with business needs. It can easily accommodate increasing bandwidth demands without requiring significant hardware upgrades. This scalability is further supported by its modular architecture, enabling users to customize the device according to their specific requirements.

In conclusion, the Paradyne 5216 stands out as a versatile and reliable solution for advancing multi-service access needs. With its diverse connectivity options, advanced technologies, robust management features, and scalability, it serves as a solid foundation for enhancing both consumer and enterprise telecommunications infrastructures, positioning organizations to thrive in a digital-first world.