Connecting the Cables
Hardware Connection
Connect the RJ11 telephone cable as shown below.
USB cable to PC (connect after driver installation)
RJ11 cable to Telephone Line
Filter
Connect Line Filter (Optional)
1.Unplug the phone cable from the phone jack of your phone and plug it into the “WALL” jack of the Y- Line Filter.
2.Plug the ADSL cable into the “ADSL”jack of the
3.Plug another phone cable into the “PHONE” jack of the
Warning: DO NOT CONNECT THE USB CABLE INTO THE UNIT UNTIL THE DRIVER INSTALLATION IS COMPLETE.
4 | September 2004 |
