Hotwire® 6210-A2, 6211-A2, and 6381-A2
Quick Installation Instructions
Document Number 6210-A2-GZ11-00
April 2004
Installation
To install your modem:
➊Connect the LINE port of the modem to your DSL line
using the supplied phone cord.
➋ Connect the TELEPHONE port of the modem to your | LINE PHONE USB | |
1 | ||
telephone using the cord that came with your telephone. |
RESET
LAN DEFAULT POWER
➌ Connect either:2
3
4
• The LAN port of the modem to a 10/100BaseT Ethernet network interface card on your PC, or to a hub or switch on your network. An Ethernet cable is supplied with your modem.
– or –
• The USB port of the modem to a free USB port on your PC.
➍Connect the POWER receptacle to the power supply and plug the power supply into a wall outlet.
If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard.
See the user’s guide on the CD for important safety instructions and more information.
OR
Copyright © 2004 Paradyne Corporation.
