Paradyne 7110 SNMP F E A T U R E S, Ports And Connectors, Specifications, Direct Snmp Management

F E A T U R E S

•	DIRECT SNMP MANAGEMENT
• T1 AND FT1 SUPPORT
• SINGLE V.35 DATA PORT
•	PROVIDES FDL FOR T1 IN-BAND SNMP
	MANAGEMENT

PORTS AND CONNECTORS

The 7110 provides a single V.35 connector for connection of a router or other data equipment (DTE). The ASCII terminal port can support either a direct connect ASCII terminal for local setup and diagnostics, or a modem connection for remote access to the terminal port for setup and diagnostics. The management port can be directly connected to an SNMP manager, an ASCII terminal or printer for alarms to be printed, or connected to a router port or external LAN adapter for SNMP management.

Terminal Modem	V. 35 DTE
Power	Data Port
or
Terminal/Management	NETWORK
POWER	D

	T
!	E

or		or
		Router Port,	User Data
		LAN Adapter	Network
			Ports
	ASCII	or Modem
NMS Host
	Terminal

or Printer

• SUPPORTS Nx56 AND Nx64 Kbps

APPLICATIONS

• FRIENDLY ASCII (VT-100) USER INTERFACE

• DUAL EIA-232 (DB-25) CONNECTORS FOR

ASCII INTERFACE AND NETWORK

MANAGEMENT

• SLIP OR PPP MANAGEMENT CONNECTION

PROTOCOL

• MIB II AND ENTERPRISE MIB SUPPORT

• TELNET

• 5-YEAR WARRANTY, RETURN TO FACTORY

7110 SPECIFICATIONS

Approvals

FCC Part 15: Class A digital device

FCC Part 68: Refer to the equipment’s label for Registration Number

Listed UL 1950

Certified CSA 1080.0 M1983

Safety: Certified Component CSA 22.2, No. 950-M93 Emissions Class A digital apparatus

Clock Sources

T1 network interface, port, or internal clock

Environment

Operating Temperature: 32° to 122° F (0° to 50° C)

Storage Temperature: -4° to 158° F (-20° to 70° C)

Relative Humidity: 5% - 95% (non-condensing)

Shock and Vibration: Withstands normal shipping and handling

Network T1 Interface

Physical Interface (USA): RJ48C

Physical Interface (Canada): CA81A using adapter cable (Optional feature 3100-F1-501)

Framing Format: D4, ESF

Coding Format: AMI, B8ZS

Line Build-Out (LBO): 0.0 dB, -7.5 dB, -22.5 dB

ANSI PRM: Selectable

Bit Stuffing: FCC Part 68, AT&T TR 62411

Loopbacks

Standard: AT&T TR 54016, AT&T TR 62411, ANSI T1.403.1989

Additional: LLB (Line Loopback), PLB (Payload Loopback), RLB (Repeater Loopback), DTLB (Data Terminal Loopback), DCLB (Data Channel Loopback), V.54 Loop 2 and Loop 3, ANSI T1.403 Annex B Fractional T1 Loopback

Front Panel Indicators

System LEDs:

OK = Normal Operation

FAIL = Fault in DSU

TEST = Test in Progress

Network LEDs:

SIG = Signal Present

OOF = Out of Frame

ALARM = Alarm Condition

EER = Excessive Error Rate

Port LEDs:

TXD = Transmit Data

RXD = Receive Data

RTS = Request To Send

CTS = Clear To Send

DTR = Data Terminal Ready

IP Connectivity

Up to 20 routes

MIB II Object Groups Supported

I.ICMP group

II.Interfaces group:

•T1 network

•DTE Data port

•Terminal port

•Management port III. IP group

IV. SNMP group

V.System group VI. TCP group

VII. Transmission group:

•T1 network - DS1/E1 MIB

•DTE Data port - RS-232-like MIB

•Terminal port - RS-232-like MIB

•Management port -RS-232-like MIB VIII. UDP group

DTE Port Interface

Standards: 34-pin connector (socket) ITU V.35 (ISO 2593)

Rates: Nx64: 64 Kbps - 1.536 Mbps Nx56: 56 Kbps - 1.344 Mbps

Management Port

25-pin DB-25 connector (socket) EIA-232 / ITU V.24 (ISO 2110)

Management Port Data Rates

9.6, 14.4, 19.2, 28.8, and 38.4 Kbps Synchronous/Asynchronous

2.4, 4.8 asynchronous only

Terminal Port

25-pin DB-25 connector (socket) EIA-232 / ITU V.24 (ISO 2110)

Terminal Port Data Rates

2.4, 4.8, 9.6, 14.4, 19.2, 28.8, and 38.4 Kbps

Async Terminal

ANSI X3.64/VT-100 compatibility

Data Rate: 2.4, 4.8, 9.6 (Default), 14.4, 19.2, 28.8, and 38.4 Kbps

8 bits per character, 1 stop bit, no parity

Housing

Height: 2.13” (54.1mm)

Width: 9.14” (231.2mm)

Depth (case): 6.15” (157.5mm)

Depth (case and connectors): 6.51” (164.3mm)

Power Consumption and Dissipation

4.5 watts, 15.4 BTU/hr. at 120V AC

Power Requirements

DSU-7110-2-0897

NMS Compatibility	120V AC ± 12V AC
SNMP Network Manager	60 Hz ± 3 Hz

For additional information on this or any Paradyne product or service, contact the office nearest you. Or, dial toll-free (USA) 800 PARADYNE or call 813 530-8623. Fax (USA) 813 530-8216.

Toronto 905 709-5000 fax: 905 709-3469	Montreal 514 288-0001 fax: 514 288-1246
Europe 44-1-753-515000 fax: 44-1-753-550011	Japan 81 3-5541-6630 fax: 81 3-5541-6631
Hong Kong 852 2543-0083 fax: 852 2541-3767	Latin America 813 530-8358 fax: 813 532-5240
Singapore 65 355-5230 fax: 65 355-5244	Visit the Paradyne Power Pages at http://www.paradyne.com

Specifications subject to change without notice. Printed in U.S.A. ©Paradyne Corporation 1997.

ACCULINK is a registered trademark of Paradyne Corporation. PARADYNE and Performance Wizard are trademarks of Paradyne Corporation. All other products or services mentioned are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners.