C L A S S I C

LOCATION OF APPLIANCE

This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom or shower room. It is essential that the appliance is positioned as stated below. The appliance must be a minimum of 20mm from the rear wall (note that this dimension is provided by the inlet elbow). Shelves, wall cabinets and cooker hoods must not be fitted closer than 500mm to the top of the grill canopy or within 100mm of the sides of the grill. Curtains must not be fitted immediately behind the appliance or within 200mm of the sides of the grill. If fitted next to or between two base units a minimum space of 1mm must be left between the units and the sides of the appliance. The hotplate must be set to a minimum of 7mm above the adjacent units (note that the levelling feet fitted to the appliance will achieve a nominal height to hotplate level of 907mm -5+13mm). Base units not meeting the above conditions must be a minimum of 100mm away from the hotplate. L.P.G. cookers MUST NOT be installed below ground level i.e. in a basement, or be fitted aboard any boat, yacht or other vessel.

INSTALLATION

1.PARTS REQUIRED

The loose hotplate parts are packed in the polystyrene fitment on the top of the hotplate. The grill pan, grill pan handle, fixing screws and splashplate fixing screws can be found in the furniture pack which is located in the bottom compartment. The grill pan requires assembly before use (see Fig. 1).

NOTE: Taptite screws are used to secure the handle. These are thread forming screws and sufficient pressure must be applied to allow the screws to produce a thread in the plunged holes.

2.GRILL ASSEMBLY

The two splashplate screws marked A (see Fig. 1a) should be screwed into the back of the appliance about halfway in. Engage the keyhole slots in the splashback behind the two screws taking care not to trap the H.T. wire (see Fig. 1b).

Insert the four splashplate screws marked B (see Fig. 1b). Tighten 6 off splashplate screws (see Fig.1b).

Connect the grill supply union at the back of the appliance and pull the grill H.T. lead through the opening in the splashplate. Feed lead through the hole in the top right hand side of the splashplate and connect on to the grill electrode, (see Fig.1b)

Fig.1

Grill Pan Handle Assembly:

Assemble grill pan (see Fig.1) and secure two screws provided.

Connect grill H.T. lead to grill electrode

Fig.1a

Fig.1b

32

Page 31 Page 33
Page 32
Image 32
Parkinson Cowan U02021 installation instructions Location of Appliance, Parts Required, Grill Assembly
Page 31 Page 33

U02021 specifications

The Parkinson Cowan U02021 is a versatile and efficient cooking appliance designed for modern kitchens. With its blend of practicality and advanced technology, this model has gained a reputation among home cooks and professional chefs alike. Its main features, cutting-edge technologies, and unique characteristics make it a sought-after choice for those looking to enhance their cooking experience.

One of the most notable features of the Parkinson Cowan U02021 is its generous oven capacity. With a spacious interior, it allows users to prepare multiple dishes simultaneously, making it ideal for family meals and large gatherings. The appliance also incorporates advanced heat distribution technology, ensuring that foods are cooked evenly while retaining moisture and flavor.

The U02021 is equipped with several cooking modes, including conventional baking, grilling, and fan-assisted cooking. These options provide flexibility for different recipes, allowing users to experiment with various cooking techniques. The intuitive control panel is user-friendly, enabling cooks to easily select their desired mode and temperature with precision.

Energy efficiency is also a highlight of the Parkinson Cowan U02021. Designed to minimize energy consumption without compromising performance, this appliance not only helps reduce utility bills but is also an environmentally friendly choice. Its eco-mode function helps optimize energy use during less intensive cooking periods.

Safety features are paramount in the design of the U02021. The appliance comes with a built-in child lock, ensuring that little hands can’t inadvertently tamper with settings. Additionally, it features a temperature control mechanism that prevents overheating, giving users peace of mind while cooking.

Aesthetically, the U02021 stands out with its sleek and modern design. Available in various finishes, it complements a range of kitchen styles, from contemporary to classic. The easy-to-clean surfaces make maintenance a breeze, allowing users to spend less time on upkeep and more time enjoying their culinary adventures.

In summary, the Parkinson Cowan U02021 is not just a cooking appliance; it is a comprehensive solution for those who value efficiency, safety, and style in their kitchen. With its wide array of features and technologies, it caters to both everyday cooking needs and ambitious culinary projects, making it a valuable addition to any household.
Top Page Image Contents