General safety advice for … / Before first use / Preparing the tool for use
switch is in the middle position (lock). | Removal: |
To prevent the device from starting up uninten- | Pull out the bit out of the tool holder |
tionally. |
|
9.
Original ancillaries / accessories
Use only the ancillaries and accessories that are detailed in the operating instructions. The use of ancillaries and ac- cessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you.
Before first use
Charging the rechargeable battery on the device (see Fig. D)
Note: The battery is supplied partially charged. Charge the battery for at least three hours before first use. You can charge the
Starting the charging process:
Connect the mains adapter 10 to a 230 - 240 V~ 50 Hz mains socket.
Connect the mains adapter 10 to the charging socket on the device 5 .
The rechargeable battery is charged when the battery indicator 3 changes from red to green.
Ending the charging process: Disconnect the mains adapter 10 from the mains socket.
Disconnect the mains adapter 10 from the charging socket on the device 5 .
Changing the bits / screwdriver bit inserts
Insertion:
Insert the bit directly into the tool holder 9 .
Preparing the tool for use
Switching on / off the cordless screwdriver
Switching on:
To start the appliance squeeze on the ON / OFF switch 7 and then keep it pressed down.
Switching off:
To stop the appliance, release the ON / OFF switch 7 .
Changing the direction of rotation
Clockwise:
Slide the direction of rotation switch 1 to the left.
Press the ON / OFF switch 7 . The direction indicator (clockwise) 2 illuminates. You can now screw in the screws.
Anticlockwise: |
|
|
|
|
|
| ||
Slide the direction of rotation switch | 1 | to the | ||||||
right. |
|
|
|
|
|
| ||
Press the ON / OFF switch | 7 | . The direction in- | ||||||
| illuminates. You can | |||||||
dicator (anticlockwise) | 4 |
| ||||||
now screw out the screws. |
|
|
|
|
|
| ||
Lock: |
|
|
|
|
|
| ||
Slide the direction of rotation switch | 1 | into | ||||||
| ||||||||
the middle position. The ON / OFF switch | 7 |
| ||||||
is now locked. |
|
|
|
|
|
| ||
Switching on / off the
LED lights 8
Switching on:
Press the ON / OFF switch (LED lights) 6 and keep it pressed.
10 GB/IE
