Dust extraction using external vacuum extraction:
WARNING! If there is an explosive mixture of dust and air you must use a vacuum device espe- cially intended for that purpose.
DANGER OF FIRE! Do not use vacuum dust extraction (dust collection box or vacuum cleaner) when sanding metals (flying sparks).
1.Push the extraction adapter 11 on to the dust extraction spout 5 on the side of the device (see Fig. C).
2.Slide the hose of a suitable dust extraction de- vice approved for that purpose (e.g. a workshop vacuum cleaner) on to the extraction adapter 11 .
Operation
Switching on and off
The PBS 900 A1 belt sander has
When operating the belt sander you can select between intermittent or continuous operation mode. For short sanding tasks use the intermittent operation mode. For longer sanding tasks we recommend the continuous operation mode. Whilst working in your selected mode the device functions as follows:
To switch on intermittent operation mode: Press the ON / OFF switch 3 .
To switch off intermittent operation mode: Release the ON / OFF switch 3 .
To switch on continuous operation mode:
Press the ON / OFF switch 3 , and keep it pressed, then press the locking knob 2 .
Preparing for use / Operation
To switch off continuous operation mode: Press and then release the ON / OFF switch 3 .
Selecting the correct rotational speed and sanding belt
You can select the belt speed using the belt speed adjuster wheel 1 even whilst the sander is running. The optimum belt speed depends on the workpiece and the workpiece material. Always confirm the best speed by carrying out a small test. The follow- ing table lists some recommended values to help you determine the optimum speed.
Material / type of | Softwood |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 240 |
Preselected rotation | high |
speed |
|
Material / type of | Hardwood |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 180 |
Preselected rotation | high |
speed |
|
Material / type of | Chipboard |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 150 |
Preselected rotation | high |
speed |
|
GB/IE
11
