Commissioning / Working … / Maintenance …/ Service centre / Warranty
To switch on intermittent operation mode: Press the ON / OFF switch 1 .
To switch off intermittent operation mode: Release the ON / OFF switch 1 .
Switching on continuous operation:
Press the ON / OFF switch 1 , keep it pressed down and press the locking button 2 .
Switching off after sustained operation: Press the ON / OFF switch 1 and then release it.
Working instructions
Wait until the electric tool has stopped moving before you put it down.
Grinding Surfaces
Turn the electric tool on, place the entire grinding surface on the substrate that is to be worked on and move it with moderate pressure across the workpiece (see Illustration B, C, D). Note: The rate of metal removal and the grinding pattern are essentially determined by the grinding disc that has been selected and the grinding pressure. Only
Please ensure that the grinding pressure is even. An excessive increase in the grinding pressure leads not only to a higher rate of met- al removal, but also greater wear and tear on the grinding disc.
You should not use a grinding disc that has been used for working metal for other materials.
Maintenance and Cleaning
WARNING! RISK OF INJURY! Before carrying out work on the appliance, always remove the plug from the power socket.
The rotary sander is maintenance free.
Clean the appliance regularly, preferably direct- ly on completion of the task.
Use a dry cloth to clean the device. Under no circumstances should you use petrol, solvent or cleaners which attack plastic.
Keep the ventilation openings clear at all times.
Remove dust clinging to the sander with a brush.
Service centre
WARNING! Have your device re- paired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.
WARNING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.
Warranty
The warranty for this appliance is for 3 years from the date of purchase. The ap- pliance has been manufactured with care and meticulously examined before deliv- ery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a
The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile compo- nents, e.g. buttons or batteries. This product is for pri- vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im- proper handling, use of force and internal tamper- ing not carried out by our authorized service branch.
GB/IE 11
