General safety advice / Operation

Safety advice relating specifically to this device

JChildren or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device.

ATTEntIOn! To avoid the danger of injury, burning and dangers to your health:

JIf danger arises, pull the mains plug immediate- ly out of the mains socket.

Danger of Personal Injury! Never use the appliance as a hair dryer.

J Do not direct the heat flow at persons
	or animals.
J Do not look directly into the opening of the heat
J	nozzle	3	.
			Danger of burns! Do not
			Danger of burns! Do not
			touch the hot nozzle. Wear protec-
J			tive gloves.
			Wear protective glasses.
			Wear protective glasses.
J			Danger oF Fire and ExpLO-


			sIOn! The appliance develops
			very high temperatures.
			very high temperatures.
			If the device is not used carefully,
			it can give rise to increased risk of

using the device, always pull the mains plug out of the mains socket.

JDo not direct the device at the same spot for too long a period.

JMaintain a distance between the jet outlet nozzle and the workpiece or the surface being heated. An air blockage could lead to over- heating of the appliance.

JPay heed to the direct working area and also to its surroundings. The heat produced could reach to inflammable articles located out of the visible area.

JAlways keep the device clean, dry and free of oil or grease.

JNever use the device for a purpose for which it was not intended.

QOperation

QPreparing the device for use

The mains voltage at the mains socket must match that shown on the rating plate on the device. Devices marked with 230 V can also be operated at 220 V.

Caution! When using the device, never allow the ventilation slots to be covered.

Caution! Danger of burns! Do not touch the hot nozzle.

fire or explosion.

J Do not work in the vicinity of easily ignitable

gases or materials.

Heating of plastics, paints, varnishes etc. can

lead to the creation of gases that are hazard-

ous to health. Make sure you always have

adequate ventilation.

Switching on the device:

jPress the ON / OFF switch or “II“.

Switching off the device:

jPress the ON / OFF switch

into setting “I“

into setting “0“.

J Let the device cool down completely before

you put it into storage. Always place your

heat gun down on its end, with the nozzle

pointing upwards.

J In addition, you should never leave the device

working unattended.

J When taking a break from your work, before

carrying out any tasks on the device itself (e.g.

changing the nozzle) or when you are not

Adjusting the air quantity and temperature: You can use the temperature and air quantity control

2to set two different blower levels. It is therefore possible to select the appropriate quantity of air and temperature in accordance with the intended use:

Setting I	300 l / min	350 °C

Setting II	500 l / min	550 °C

GB/IE/CY 9

PHLG 2000-2 specifications

The Parkside PHLG 2000-2 is a powerful handheld heat gun designed for a variety of applications, catering to both DIY enthusiasts and professionals. This versatile tool is ideal for tasks such as paint stripping, soldering, and shrinking tubing, making it a valuable addition to any toolkit. With a robust design and user-friendly features, the PHLG 2000-2 stands out in the competitive market of heat guns.

One of the main features of the Parkside PHLG 2000-2 is its powerful 2000-watt motor, which provides an impressive output for rapid heating and efficient performance. The heat gun offers two different temperature settings, allowing users to choose between 350°C and 600°C, which makes it suitable for a wide range of applications. The adjustable airflow rate further enhances its versatility, enabling users to control the intensity of the heat according to the specific requirements of their projects.

Safety is a priority in the design of the PHLG 2000-2. It features an integrated overheat protection system that automatically shuts off the heat gun when it reaches excessive temperatures, preventing potential damage and ensuring user safety. The ergonomic handle is designed for comfort and ease of use during prolonged periods of operation, reducing fatigue and improving handling.

The PHLG 2000-2 is equipped with a variety of practical attachments including a deflector nozzle and a reflector nozzle, which enhance the tool's capabilities. These nozzles allow for precise heat application, making it easier to work on intricate tasks. The heat gun also comes with a sturdy stand that allows for hands-free operation, providing users with the added convenience of multitasking.

In terms of portability, the Parkside PHLG 2000-2 is designed with a lightweight body, making it easy to maneuver and carry. Its durable construction ensures longevity, and it is suitable for both indoor and outdoor use. Whether you are tackling a home renovation project or working on professional repairs, the PHLG 2000-2 delivers reliability and excellent performance.

Overall, the Parkside PHLG 2000-2 is an exceptional heat gun that combines power, safety, and versatility. With its impressive specifications and thoughtful design, it has earned a reputation as a go-to tool for various heating applications, making it a must-have for anyone looking to achieve professional results with ease.

Parkside PHLG 2000-2 manual General safety advice / Operation, Preparing the device for use

Models: PHLG 2000-2

Safety advice relating specifically to this device