Preparing for use
Vacuum dust extraction | Reducer piece |
WARNING! DANGER OF FIRE! There is the danger of fire when working with electrical devices that have a dust box or can be connected to a vacuum cleaner. Under certain conditions the wood dust in the dust extraction bag (or in the vacuum‘s dust bag) may ignite, e.g. as a result of flying sparks generated when abrading metals or metal objects left in wood. This can happen partic- ularly if the wood dust is mixed with paint residue or other chemicals and the abraded particles are hot from prolonged abrasion. Therefore you must empty the device’s dust collection box and the vacuum cleaner’s dust bag before taking a break or stopping work and always avoid overheating of the abraded particles and the device.
Wear a dust mask!
WARNING! Always pull the mains plug is out of the socket before doing any work on the device.
Dust box for internal vacuum extraction
Connection:
Push the dust box for internal vacuum extraction
4on to the
Removal:
Press the release button 5 of the dust extraction box for internal vacuum extraction 4 and withdraw it towards the rear of the device.
NOTE: Always empty the dust collection box 4 in due time and shake any remaining dust out; this will ensure optimal vacuum performance.
Connection:
Push the reducer piece 3 into the adapter port 2 .
Push the hose of a suitable dust extraction de- vice approved for that purpose (e.g. a workshop vacuum cleaner) on to the reducer piece 3 .
Removal:
Pull the dust extraction device hose off the reducer piece 3 .
Pull off the reducer piece 3 .
Attaching / detaching sanding sheets
WARNING! Always pull the mains plug is out of the socket before doing any work on the device.
Attaching:
Sanding sheets are attached to the backing plate
7by means of the hook and pile fastening.
Detaching:
Simply pull the sanding sheet off the backing plate 7 (see Fig. C).
Rotating the backing plate
WARNING! Always pull the mains plug is out of the socket before doing any work on the device.
Rotate the backing plate 7 into the desired position (see Fig. D).
Sanding and surfaces:
The sanding output and the quality of the surface finish are determined by the grade of grit on the sanding sheet.
Always use sanding sheets with grades that are suitable for the particular surface you are sanding.
10 GB/IE
