Introduction
Do not drink!
Dispose packaging and appliance in an
Soldering gun PLP 100 A1
Introduction
Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes and if necessary pass them on to a third party.
Proper use
The device is intended for soldering tasks in a DIY environment. Soft solder- ing takes place at temperatures below 450 °C. Suitable solders have typical melting temperatures around 200 °C. Use the device only as described and for the indicated purposes. The device is not intended for commercial use. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufac- turer will not accept liability for loss or damage arising from improper use.
Description of parts and features
1Soldering tip
2 Union nut
GB/IE 7
