Parkside XQ2 SE manual Advice on use, Maintenance and cleaning, Disposal, Service centre Warranty

Preparing for use / Maintenance and cleaning / Disposal / Information

jAlways use sanding sheets with grades that are suitable for the particular surface you are sanding.

QAdvice on use

jSwitch the device on before placing it against the workpiece.

jApply light sanding pressure only.

jAdvance the device at an even rate.

jChange sanding sheets at the appropriate time.

jDo not work on different types of material using the same sanding sheet (e.g. wood and then metal). To achieve the best sanding results you should use unworn, undamaged sanding sheets.

jClean the sanding sheet from time to time with a vacuum cleaner.

jSand difficult to reach places with the front or side corners of the backing plate 7 .

jWork in parallel and overlapping widths.

jAfter sanding the workpiece, lift the device from the workpiece before switching it off.

QMaintenance and cleaning

WarnING! Always pull the mains plug is out of the socket before doing any work on the device.

The delta sander is maintenance-free.

jClean the device frequently. This should be done immediately after you have finished using it.

jFor cleaning the housing use a dry cloth only.

jRemove any adhering sanding dust with a narrow paint brush.

jNever any kind of sharp object or petrol, solvents or cleaning agents that might attack plastic. Do not allow any liquids to enter the inside of the device.

jAlways keep the ventilation slots 6 clear.

QDisposal

The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.

Do not dispose of electrical power tools with the household rubbish!

In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices.

QInformation

QService centre

J WarnING! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.

J WarnING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.

QWarranty

This appliance is guaranteed for 3 years from the date of purchase. It has been care- fully produced and meti-culously checked before delivery. Please keep your receipt as proof of purchase. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods can be transmitted free of cost only in this manner. This warranty applies only to the initial purchaser and is non-transferable.

The warranty covers only material or manufactur- ing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries.

GB/IE/CY 11