Parrot SOUND SYSTEM Colour, Meaning, MEANING OF THE LEDs, Remote Control Of The Speakers

MEANING OF THE LEDs

• The blue LED means that the system is being used in stereo

Colour			Meaning
Alternating blue/red	The two speakers are in the auto-setup phase.
Dim blue	The speakers will be undetectable for any
	Bluetooth device that has not already been
	paired. This prevents an unauthorised device
	from connecting and streaming music.
Bright blue	One or more sources are connected to the
	speakers. Waiting for music.
Blue - flashing quickly	The speakers are detectable and are ready to be
	detected by the source.
Blue - flashing slowly	Streaming in progress and the speakers have
	been muted (no sound).
	Press	or	to return to active mode.

• The red LED means that the system is being used in mono.

Alternating blue/red	The two speakers are in the auto-setup phase.
Dim red	The speaker will be undetectable for any
	Bluetooth device.
Bright red	One or more sources are connected to the
	speaker. Waiting for music.
Red - flashing quickly	The speaker is detectable and ready to be
	detected.

Red - flashing slowly	Streaming in progress and the speaker has been
	muted (no sound). Press	or	to return
	to active mode.

REMOTE CONTROL OF THE SPEAKERS

•The AVRCP Bluetooth profile (Audio Video Remote Control Profile) built into the speakers allows the volume to be controlled. You can therefore adj- just the volume using devices supporting this profile. To set it up, briefly press

the button to enable the speakers to be detected by a Bluetooth device. Search for peripherals on the device and connect it using PIN code «0000».

MODE DEGRADE

DEGRADED MODE

•When the speakers are in degraded mode, it means that the auto-setup phase did not finish correctly. Both speakers therefore work as two independent speakers. Just one speaker is active and streams the signal in mono (the LEDs are red).

•To return to normal mode, bring the speakers close together (less than 10m) and they should automatically switch back to normal mode by restarting the auto-setup phase.

•Note: the auto-setup phase can also be started by holding down the button for two seconds.

 Parrot SOUND SYSTEM