Pass Labs XA100 Specifications, Dimensions, 19 “ W x 9” H x 22” D, Shipping Weight, 68 lbs

XA100 Specifications

XA100 Owner’s Manual

All figures obtained after 1 hour warm-up, with regulated 120 VAC power line. See manual notes about AC power line regulation.

Gain	26 dB
Freq. Response	-3 dB at 1.5 Hz, -3 dB at 100 kHz
Power Output	100 watts max @ 1% THD,
	1 kHz, 8 ohms
Maximum Output Voltage	plus, minus approx. 40 volts
Maximum Output Current	plus, minus approx. 5 amps
Input Impedance	22 kohm balanced
	11 kohm unbalanced
Damping factor	30 ref @ 8 ohms nominal
Slew rate	plus, minus 50 V/uS
Output Noise	300 uV unweighted 20-20 kHz
Balanced CMRR	approx. -60 dB @ 1 kHz
DC offset	< 100 mv
Power Consumption	approx. 300 watts
Temperature	25 degrees C. above ambient at idle
Dimensions	19 “ W x 9” H x 22” D
Shipping Weight	68 lbs.

For more information please contact:

Pass Laboratories Inc.

P.O. Box 219,

24449 Foresthill Rd.,

Foresthill, CA 95631

Tel: 530.367.3690

Fax: 530.369.2193

www.passlabs.com

© 2006, Pass Laboratories Inc.

“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”, “Aleph”, and “Zen” and are all registered trademarks of Pass Laboratories, Inc., and all rights thereto are protected by law.

9