page 20
▲CAUTION: THE ROTOR WILL COAST ! EVEN AFTER THE ENGINE IS OFF. MAKE SURE THE ROTOR STOPS TURNING, THEN DISCONNECT THE PLUG WIRE FROM THE ENGINE BEFORE ATTEMPTING ANY MAINTENANCE OR
PERSONAL INJURY.
31 Nut
33 Washer
32 Screw
31
33
32
Detail of the shredder hopper.
31 Nuts (outside)
32 Screws (inside)
33 Washers (inside)
Both the shredder hopper and the chipper cone are assembled with the same hardware and wrench.
21
bearing
set
screw
lock
collar
27 29
39A
39B
Detail of the outboard bearing assembly. The bearing is sealed and does not need lubrication.
30