MOUNT ASSEMBLY
The pack has two divided compartments. The topmost compartment has an access
flap that is easily opened with its’ perimeter zipper. Open this flap and you will find
the Mount Assembly parts needed for this stage of the assembly.
1. Slide the Feet assemblies into each of the 3 Leg assemblies as shown. The flatted
side of the pin faces the locking cam. Simply turn the cam downward to lock the
pin at the desired height.
2. Insert the Leg assemblies onto the bottom side of the AzEl assembly as shown,
by aligning the dowels and tightening the threaded fasteners.
3. Roughly level the Mount Assembly using the level bubble as a reference by re-
adjusting the Feet assemblies per step 1.
5