1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 1015 components to be free from defects, and will—at our option—repair or replace the prod- uct should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modifi- cation. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequen- tial damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 1015 generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and tele- vision reception. The Model 1015 has been tested and found to com- ply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection from such interference in a commercial installation. However, there is no guarantee that interfer- ence will not occur in a particular installation. If the Model 1015 does cause interference to radio or television reception, which can be deter- mined by turning the power off or disconnecting the modem, the user is encouraged to try to correct the interference by one or more of the fol- lowing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiv- ing equipment into a different AC outlet (such that the computing equipment and receiver are on different branches).
1.2 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at (301) 975-1007. Packages received without an RMA number will not be accepted.
Patton Electronics’ technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1015. Technical Service hours: 8AM to 5PM EST, Monday through Friday.
1
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to con- tact Patton Electronics Technical Support at (301) 975-1007.
2.1FEATURES
•Direct connection to Unisys 5000/NCR Tower Series processors
•Very thin case for closely spaced computer ports
•Available with RJ-11, RJ-45 or terminal block with strain relief
•External DCE/DTE switch
•Range to 17 miles
•Data rates to 19,200 bps
•No AC power or batteries required
•Surge protection (Model 1015S)
•Made in the USA
2.2DESCRIPTION
The Patton Model 1015 Miniature Short Range Modem provides direct connection to DB-15 equipped RS-232 devices, such as the Unisys (Sperry) 5000 and the NCR Tower series. Using the latest in surface mount technology, the Model 1015 combines high quality per- formance and a miniature package. The Model 1015 requires no AC power or batteries, supports distances to 17 miles and operates at data rates to 19.2 Kbps. The Model 1015 is compatible with the Model 1000, 1005, 1006, 1009 and other Patton short range modems.
Measuring only 2.6” x 1.3” x .75”, the Model 1015 is housed in a pop-open ABS plastic case. It is equipped with a male or female DB- 15 connector and a choice of interfaces (RJ-11 jack, RJ-45 jack or ter- minal blocks with strain relief). In some models, an externally accessi- ble DCE/DTE switch allows easy connection to multiplexers and other devices. The surge protected Model 1015S incorporates Silicon Avalanche Diodes, which provide 600 watts peak per wire of protection against harmful transient surges.
2
