Patton electronic 2300M user manual Fiber connector locations, 2311M

3.Connect the dual fiber ST or SC connectors on the media converter (see Figure 3) directly to the 802.3 compliant multi-mode fiber cable equipped with male ST or SC connectors or via 802.3 compliant multi-mode fiber patch cord (not provided) and corresponding ST or SC fiber wall jacks.

Note Verify that the cable connecting the TX and RX of the 2300M Series unit is connected to the RX and TX respectively on the remote 2300M Series unit or network device. End-to-end multi- mode fiber connections between two Model 2300M Series Ethernet Media Converters or between one Model 2300M Series Media Converter and other network devices must not exceed 2 km (1.24 miles), 298.7 m (980 ft) in 100Base-SX mode (Model 2311M only).

TP10
FL/SX	TPACT
-		TP100
	10/100Base			FO10
Ethernet
			to		FOACT
	Converter
2311M			Media			FO100
Maryland
	Negotiating
				T/TX
		Model			-	10/100Base
Gaithersburg,
			-
				Auto

PWR

ST or SC style fiber connectors

Figure 3. Fiber connector locations

4.Connect the DC power output side of the power supply adapter to the power jack (see Figure 1 on page 8) on the 2300M Series unit.

5.Connect the AC power side/cord of the power supply adapter to the appropriate AC power source.

The media converter will power up and LED indicators will illuminate once connected to the power source.

10