Patton electronic manual What are the Key Features and Benefits of the Model 3086FR?

GoCard

__

What are the Key Features and Benefits of the Model 3086FR?

Key Features	Benefit
	Supports for both FRF.5 and FRF.8 Interworking Agreements for non-
Simultaneous Frame Relay to ATM	routed FR to ATM conversion. Use the IP router to route from any-to-
conversion, routing and multi-	any port using Ethernet, PPP, FR, or ATM encapsulation.
protocol encapsulation	Offers both services simultaneously!
	Powerful features include IP routing, NAT/NAPT, DNS, Firewall/IDS,
Advanced IP routing features	and DHCP making shared Internet connectivity simple, secure and
	easy.
	Customers have a 10/100 Ethernet port and either a serial or T1/E1
Dual Simultaneous	port for simultaneous transmission over the same DSL line.
	Bandwidth for each port is user configurable. Each port can be
User Interface Ports
	shutdown if required.
	Patton’s FlexIP™ technology transports simultaneously the serial
FlexIP™ technology eliminates the	frame relay data from any serial device and the IP data from the
need for multiple pieces of	3086’s Ethernet port over a single DSL connection. For simultaneous
equipment at the customer premise	serial and IP data, the 3086FR IAD operates in “split DSL bandwidth
to provide multiple service	mode,” so it is sharing one DSL connection for both types of data.
User selectable Standards-based	The DSL port meets ITU-T standard G.991.2 including Annex A and
	Annex B operation and supports G.Handshaking (G.994.1).
G.SHDSL
High-speed 2-wire DSL from 64kbps	Support for nx64 kbps for n = 1 to 36 and ix8 kbps for I = 0 to 7 per
	G.991.2.
to 2.3 Mbps
	Using just 2 wires of ordinary twisted pair telephone wire, the
Long Reach DSL	3086FR can reach distances greater than 30,000 ft (9 km).
Auto-sensing 10 or 100BaseT and	No configuration necessary, just Plug your Ethernet connections in
full or half-duplex Ethernet.	and Play.
10/100 Ethernet with	Eliminate the need for crossover Ethernet cables with the built-in
	MDI-X crossover switch. Easily connect to any computer or
MDI-X	hub/switch with any available Ethernet cable.
	A built in Web/SNMP management system allows the operator to
	configure the 3086FR locally and remotely, manage each DSL link,
Flexible management options	and perform initial test loops all with just a web browser. Setup is
	likewise a snap with the command line interface (CLI) accessible via
	either the VT-100 console port or a telnet session. Manage the unit
	from anywhere in the world through an IP network.
	Patton packs all these features including an internal power supply in
Convenient desktop modem	a small compact package that makes this product easy to fit into
	almost all customer environments.
	Front mounted LED’s provide a quick look at the 3086FR status.
Front mounted LED’s	LED’s provide information on Power, DSL port status, WAN status and
	Ethernet status.
	2