Patton electronic 07MD3086-DS4, Why use our Model 3086?, 3086CompetitivePositioning, Line Type

Why use our Model 3086?

The Patton Model 3086 ipRocketLink IAD delivers all the advanced features needed for secure, reliable, and high speed data connections. By combining serial access with Ethernet/IP, the 3086 IAD makes next-generation connectivity simple, easy, and cost effective.

Available with standard WAN and serial interface such as V.35, X.21, T1, and E1, the 3086 is a potent NTU for any network con- nection. In addition, the Model 3086 offers a standard 10/100 full-duplex Ethernet/IP interface with capabilities ready for any routing task. NAT, DHCP, Firewall, IDS, and Filtering give you complete control over network services and security. For ulti- mate flexibility the 3086 allows simultaneous operation of the serial and Ethernet ports.

The 3086 IAD can be used back-to-back or with the Patton ForeFront Access Infrastructure System. Additionally, the 3086 IAD can be used with any other G.SHDSL TDM or Packet sys- tem.

3086CompetitivePositioning

		Patton	Cisco	ZyXel
	Line Type	3086	828	782
		G.SHDSL	G.SHDSL	G.SHDSL
	ATM Encapsulation	YES	Yes	YES
Connectivity	Native PPP/Frame Relay	YES	NO	NO
	Bridging/PPPoE/IPoATM	YES	Yes	Yes
	NAT/MultiNAT/DHCP	YES	Yes	Yes
	Statefull Firewall/ACL	YES	Yes	Yes
	V.35/X.21/T1/E1	YES	NO	NO
	Status LEDS	12	10	6
	ENET Cross-Over Switch	YES	Yes	NO
Use	10/100 Ethernet	YES	NO	Yes
	Built-In Web Mgmt	YES	NO	NO
of
Ease	Tech Support	FREE	$$$	included
	Software Upgrades	FREE	$$$	included
	Compact Unit	Compact	Large	Large
	Best Value	YES	$$$	$$$

Specifications

DSL	G.991.2 ITU G.SHDSL Annex A & Annex B, G.994.1 G.hs.
	nx64 data rates over 2-wire full-duplex to 2.3 Mbps, sym-
	metrical, TC-PAM encoding. Distances: 32,000 ft (9.8 km)
	at 192 kbps to 18,000 ft (5.6 km) at 2.312 Mbps.
DSL Connection	Shielded RJ-11F isolation per IEC 950
Ethernet Connection	10/100Base-T, auto-sensing, full/half-duplex operation,
	built-in MDI-X
Serial Interface	V.35—M/34F, X.21—DB15F (DCE/DTE), T1—RJ48C,
	E1—RJ48C, and dual BNC
Management	EIA-561 RJ-45 RS-232, VT-100 CLI, TELNET, Embedded
	WEB/HTTP, SNMP, Logging or SMTP on events: POST,
	POST errors, line/DSL, PPP/DHCP, IP MPOA AAL5 &
	bridged encapsulation RFC 2684 & RFC 1577 IPoATM.
	LLC/VC Mux support.
ATM Support	UNI 3.1, and 4.0 ATM QoS with UBR/CBR/nrt-VBR/rt-
	VBR and per-VC queuing and shaping. • Peak cell rate
	shaping on a per-VCC basis up to 32 active VCCs •
	I.610 OAM network management including AIS/RDI,
	loop-back and performance monitoring.
Frame Relay	Frame Relay over DSL. Encapsulates IP traffic from
(Keyed feature)	Ethernet port into Frame Relay according to RFC-1490.
Protocol	Enhanced ILMI 4.0 for auto-configuration of ATM PVCs,
	IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP
	(RFC 950), ARP (RFC 826). IP Router with RIP (RFC
	1058), RIPv2 (RFC 2453), OSPF (RFC 2328) Integrated
	DHCP Server (RFC 2131). Selectable IP leases and
	MAC/IP pairings.

Protocol (continued)	DHCP relay agent (RFC 2132/RFC 1542) with 8 address
	pools. DNS Relay. IGMP v1 and v2. IP-in-IP (RFC-2003)
	encapsulation, Ethernet Bridging.
	NAT/NAPT with integrated application support, MultiNat
	with 1:1 mapping, Many:1, Many:Many mapping, NAT
	Port/IP redirection and mapping.
Security	DoS Detection/protection. Intrusion detection, Logging
	of session, blocking and intrusion events and Real-
	Time alerts, Password protected system management
	with a username/password for console and virtual ter-
	minal, Packet filtering firewall for controlled access to
	and from LAN/WAN. Support for 255 rules in 32 filter
	sets. 16 individual connection profiles. Access list
	determining up to 5 hosts/networks which are allowed
	to access management system SNMP/HTTP/TELNET
Indicators	12 LEDs: DSL Link; Sync Serial: TD, RD, CTS, DTR;
	LAN: TX, RX, 100M Link; Status: NS, ER, TM.
Power Supply	Internal universal 90–260 VAC input or 48 VDC input.
	Optional external power available.
	FCC Part 15A, CE Mark, EMC Directive 89/336/EEC,
Compliance	Low-Voltage Directive 73/23/EEC, EN60950, EN55022
	(CISPR 22)
Environment	Temperature: 32–122°F (0–50°C); Humidity: 5–90%,
	non-condensing
Dimensions	7.3 x 6.6 x 1.62 inch (185 x 168 x 41mm).

		Meriedweg 7	7622 Rickenbacker Drive
	CH-3172 Niederwangen		Gaithersburg, MD 20879 USA
	Phone +41	(31) 985 25 25	Phone +1-301-975-1000
	Fax +41	(31) 985 25 26	Fax +1-301-869-9293
	E-mailsales@inalp.com		E-mailsales@patton.com
07MD3086-DS4	Web www.inalp.com		Web www.patton.com

Patton is a registered trademark, and NetLink is a trademark of Patton Electronics Company in the United States and other countries.