1.0 Select configuration method
Before powering up, you must select one of the following methods for configuring your OnSite:
•Plug ‘n’ Play—The OnSite comes factory-configured for Plug ’n’ Play configuration when connected to a service-provider network.
•DIP Switch—For deploying the OnSite in back-to-back applications. To use DIP-switch configuration you must first set the DIP switches to a position other than all OFF or all ON before powering-up the OnSite. To configure your CPE using the DIP switches, refer to the section entitled “Hardware (DIP-switch) configuration” in the OnSite Model 3088A Series Getting Started Guide.
•Software Configuration—Allows you to modify configurable parameters by connecting a PC to the con- sole port and issuing software commands. To use software configuration you must set all the DIP switches to the ON position before powering-up the OnSite. To configure your CPE via the console port, refer to section “Software (CLI) configuration” in the OnSite Model 3088A Series Getting Started Guide.
2.0 Power up the CPE
Your G.SHDSL.bis CPE comes with one of the following power supply options:
•External AC adaptor with detachable power cord
•External DC power supply with terminal block connector (model 48V-PSM3)
2.1 Models with external AC adaptor
1.Connect female plug of the AC power cord to the AC adaptor provided.
2.Connect the barrel-type connector of the AC adaptor to the Power connector on the OnSite.
3.Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).
2.2 Models with external DC power supply
The 36-60 VDC DC to DC adapter is supplied with the DC version of the Model 3088A. The black and red leads plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack on the 3088A. (See figure 1).
To Power
Supply Jack
Barrel power connector
| MADEINCHINABYSUNNY | S/N:G01234567890 | OUTPUTPOWER:5WMAX | OUTPUT:+5V1.0A | INPUT:36-60V0.2AMAX | MODEL:SYD1106-0505 | SWITCHINGPOWERSUPPLY | | To -48VDC |
| -Vin | Source |
| | | | | | | |
| | | | | | | | |
| | | | | | | | +Vin | |
Black lead (-V)
Red lead (+V)
Figure 1. DC Power Supply
Model 3088A Series Quick Start Guide | 3 |
