Patton electronic 3096RC manual Specifications, ForeFront G.SHDSL System Configurations

ForeFront G.SHDSL System Configurations

The ForeFront FullPipe—configured with 3096RC T- DACs—provides up to 96 G.SHDSL links in a 4U chassis. E1 or STM-1 interface options make data network integration a snap. Combined with Patton’s 3086 CPE, it provides the complete solution.

ForeFront HalfPipe™

2U-high, 4-slot cPCI- based access node

TDM/Data Network

ForeFront FullPipe™

ForeFront FullPipe™ 4U, 8-slot platform

4U-high, 8-slot cPCI- based access node

n x E1 or STM-1 Egress ForeFront Switchblade™

ForeFront Xtreme™

6U-high, 17-slot cPCI- based access node

ForeFront DSL

Access Cards

Dual-redundant

power suppliesUp to 96

G.SHDSL links

using the FullPipe

Pass TDM and routed links

simultaneously through each CPE

Specifications

G.SHDSL	ITU-T G.991.2 G.SHDSL Annex A and Annex B.	Management	HTTP, SNMP, TELNET Ethernet, RS-232 Console Port,
	G.994.1 G.hs nx64 kbps data rates up to 2.3 Mbps (n-	Services	SYSLOG Client, Remote Software Upgrade via FTP
	1..36) over 2 wires Full duplex, symmetrical TC-PAM	Alarm Reporting	Configurable alarms; Remote SNMP Traps; Front Panel
	encoding		LEDs; 3-Contact Relay (3-pin terminal block)
G.SHDSL Distance	30,000 feet (9.4 km) at 192 kbps, 16,500 feet (5 km)	Compliance	Safety: UL/CSA per UL1950 (METS) Canadian cMET and
	at 2.3 Mbps		CS-03. EMC Directive 89/336/EEC, Low-Voltage
G.SHDSL connection	Up to 16 ports presented on a 50-pin Telco connector		Directive 73/23/EEC (EN 60950), FCC Part 15, CE Mark,
Rear Modules	Uplink module options include 4, 8, 12, or 16 T1/E1		CTR12, CTR13 FCC Part 68.
	ports	Environment	Operating temperature: 14 to 140°F (-10 to 60°C);
Ethernet Port	Single 10/100Base-T (RJ-45 connector)		Humidity: 5 to 90%, non-condensing
G.SHDSL Modems	Patton 3201, 3086, and other standards-based	Dimensions	Front blade: 0.75 H x 10.5 W x 6.3 D in.
	G.SHDSL modems		(1.9 H x 26.7 W x 16.0 D cm)
WAN Clocking	Internal, Network (from T1/E1 WAN port) or system		Rear blade: 0.75 H x 10.5 W x 3.15 D in.
	chassis		(1.9 H x 26.7 W x 8.0 D cm)
G.SHDSL Clocking	Provides clocking to the remote NTUs/Modems
Front Panel Indicators	LEDs for power, CPU, system, Ethernet, clock source,
	alarms, test mode, DSL, and WAN

07MD3096-DS7

Patton is a registered trademark and IPLink is a trademark of Patton Electronics Company in the United States and other countries.

7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Phone +1-301-975-1000 Fax +1-301-869-9293 E-mailsales@patton.com Web www.patton.com