Patton electronic 3101 quick start cord is connected, ance with local regulatory requirements

Models: 3101

1 8
Download 8 pages 33.44 Kb
Page 2
Image 2
tems without a power switch and without an external power

 

• Do not open the device when the power cord is connected. For sys-

 

tems without a power switch and without an external power

 

adapter, line voltages are present within the device when the power

WARNING

cord is connected.

 

• For devices with an external power adapter, the power adapter shall

 

be a listed Limited Power Source The mains outlet that is utilized to

 

power the device shall be within 10 feet (3 meters) of the device,

 

shall be easily accessible, and protected by a circuit breaker in compli-

 

ance with local regulatory requirements.

 

• For AC powered devices, ensure that the power cable used meets all

 

applicable standards for the country in which it is to be installed.

 

• For AC powered devices which have 3 conductor power plugs (L1, L2

 

& GND or Hot, Neutral & Safety/Protective Ground), the wall outlet

 

(or socket) must have an earth ground.

 

• For DC powered devices, ensure that the interconnecting cables are

 

rated for proper voltage, current, anticipated temperature, flammabil-

 

ity, and mechanical serviceability.

 

• WAN, LAN & PSTN ports (connections) may have hazardous voltages

 

present regardless of whether the device is powered ON or OFF.

 

PSTN relates to interfaces such as telephone lines, FXS, FXO, DSL,

 

xDSL, T1, E1, ISDN, Voice, etc. These are known as “hazardous net-

 

work voltages” and to avoid electric shock use caution when working

 

near these ports. When disconnecting cables for these ports, detach

 

the far end connection first.

 

• Do not work on the device or connect or disconnect cables during peri-

 

ods of lightning activity.

 

 

 

This device contains no user serviceable parts. This device can only be

 

repaired by qualified service personnel.

WARNING

 

 

 

 

 

 

This device is NOT intended nor approved for connection to the PSTN. It

 

is intended only for connection to customer premise equipment.

WARNING

 

 

 

In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE collection system in your country for recycling.

2

Model 3101 Series Quick Start Guide

Page 2
Image 2
Patton electronic 3101 cord is connected, ance with local regulatory requirements, or socket must have an earth ground