Patton electronic 535, 536 user manual Service, Through Friday, Features, Description

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 535/536 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at (301) 975-1007. Packages received without an RMA number will not be accepted.

The Patton Model 535/536 has no serviceable parts; therefore, it should not be opened by unauthorized personnel. If the Model 535/536 needs replacement, it must be returned to Patton Electronics.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 535/536. Technical Service hours: 8AM to 5PM EST, Monday

through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Technical Support at (301) 975-1007.

2.1FEATURES

•IEEE 802.5 compliant secondary surge protection

•Protection for 4 Mbps or 16 Mbps Token Ring Networks

•Versions for Type 1 (DB-9) or Type 3 (UTP) cabling topologies

•Low insertion loss design handles repeated surges without degrading

•Shunts surges directly to chassis ground

•Made in the U.S.A.

2.2 DESCRIPTION

The Patton Model 535 and 536 Token Ring surge protectors guard your 802.5 Network against data loss and hardware damage due to data line transients. Working in concert with existing UPS devices (which protect only the AC power side), Patton’s Token Ring protectors connect directly to Type 1 or Type 3 cable interfaces. Transients travelling along the data cables are shunted safely to chassis ground before they can impact your expensive 802.5 equipment. Both the Model 535 (Type 1) and the Model 536 (Type 3) operate passively at 4 or 16 Mbps. And both units can receive repeated surge hits from lightning strikes or other sources without sacrificing performance.

Housed in a miniature ABS plastic case, the Model 535 incorporates a DB-9 male connector on one side and a DB-9 female on the other. The Model 536 is also housed in a miniature ABS plastic case and incorporates two female RJ-45 jacks.

Warning—Should your equipment or building be subject to a direct lightning strike, this product will not provide complete protection.

1 2