Patton electronic 6511 manual Non-Blocking I/O Fabric, Integrated STM-1/OC-3 Dacs

ForeFront™ AIS

Matrix Switch with STM-1/OC-3 and Gigabit Ethernet

Model 6511

Move data rapidly with the Patton 6511 Matrix Switch and get non-blocking any-to-any TDM access, Packet Switched Ethernet, and high-speed trunking...all in a single card

Non-Blocking I/O Fabric

Get dedicated connectivity to every input and every output port while grooming TDM or switching packet data

Integrated STM-1/OC-3 DACS

Resolve traffic down to 64 kbps timeslots, switch any timeslot to any port or loop it back

Optical or Electrical Egress

Choose between short-haul electrical BNC or intermediate-range optical SC connectors

Hot Swappable and Redundant

For critical applications use dual 6511s and get 1+1 redundancy. Hot-swap cards for fast main-

Redundant Packet Switching

Reliable packet switching architecture ensures redundant paths for deploying mission-critical

WEB/SNMP Manageable

Get fault detection and resolution standard. Use the embedded HTTP/SNMP agent to man-

he Patton Model 6511 Matrix Switch is Tan integrated multimedia switching engine complete with a digital access cross-connect, high-speed STM-1/OC-3 trunk interface, wire-speed Ethernet packet switch,

and GUI management system.

The Model 6511’s flexible channel switching fabric allows non-blocking switching from any input to any output. The Channelized STM-1/OC-3 interface integrates into a SDH/SONET network, enabling users to channelize an STM-1/OC-3 down to 64 kbps timeslots. With full grooming capability the Model 6511 DACS allows any-to-any TDM mapping and can place any channel from any card onto any port.

Combined with the ForeFront AIS Packet- Switched Backplane, the Model

6511 redundantly interconnects every slot, at wire-speed, and aggregates traffic from each sys- tem card onto dual-switched uplink Ethernet ports. With increased per- formance and throughput, the

6511RCT STM-1

Trunk Module

Choose intermediate optical or short-haul electrical channelized STM-1/OC-3 interfaces.

Dual 10/100/1000 Mbps switched Ethernet ports for system packet aggregation.

packet backplane allows non-blocking access to the Model 6511, other system cards, and the uplink ports.

With the Forefront architecture, TDM and pack- et can be used simultaneously and to full capacity. In a system loaded with dual 6511’s, the high speed channel switching and packet backplane on the Model 6511 offers 1+1 redun- dancy.

Management is a snap with VT-100, TELNET, SNMP and WEB options. Manage traffic out- of-band via dual 10/100/1000 Ethernet ports or terminate PPP/FR via timeslots in-band.

With the integrated L2/L3 switch the Model 6511 provides managment access to all cards within the chassis

Master time and space with the Model 6511 Matrix Switch and realize an unequaled level of density and control over the new conver- gent network.

Visit www.patton.com for more informa- tion.

6511RC Matrix

Get high speed channel-

ized DACS, timeslot mapper, and layer 2 packet aggregation.

Use with 6511RCT and get high speed network access from DS-3 and STM-1/OC-3.