C o n n e c t i n g t h e C o m m u n i c a t i o n s C a b l e s

The printer uses either 9-pin serial communications or USB communications. For best results, use only Monarch® cables.

Open the hinged cable door by loosening the two Phillips screws and lifting up on the door.

Serial Cable

1. Plug the DB9 connector into the DB9 port.

2. Place the cable in the cable cavity.

3. Close the hinged cable door and tighten the screws.

DB9 Connector

USB Cable

1. Plug the USB cable into the USB port.

2. Lock the cable in place by placing it behind the left screw post and into the cable cavity as shown.

3. Closed the hinged cable door and tighten the screws.

USB

Port

USB

Cable

I n s t a l l i n g t h e M o u n t

Following is a list of the mounting hardware. This hardware is not provided for vertical mounting.

♦four screws (¼-20 x 2¼ socket head cap)

♦four ¼-inch flat washers

♦four dampening washers

♦one clamping plate

♦four M5x0.8 screws (not included)

2