POWER HANDLING:
There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS:
The 4 ohm loudspeaker system shall have an operating bandwidth of 58 Hz -
18 kHz. The nominal output level shall be
99 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 4.0 ohms. The maximum continuous power handling shall be 700 watts, maximum program power of 1,400 watts and a peak power input of at least 2,800 watts, with a mini- mum amplifier headroom of 3 dB. The nominal radiation geometry shall be 95
degrees in the horizontal plane and 70 degrees in the vertical plane. The outside dimensions shall be 28.56 inches high by
21.31inches wide by 17.00 inches deep. The weight shall be 56 pounds. The loud- speaker system shall be a Peavey model Impulse 1015 4 ohm.
The 8 ohm loudspeaker system shall have an operating bandwidth of 60 Hz -
18 kHz. The nominal output level shall be
100.0dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8.0 ohms.
The maximum continuous power handling shall be 500 watts, maximum program power of 1,000 watts and a peak power input of at least 2,000 watts, with a mini- mum amplifier headroom of 3 dB. The nominal radiation geometry shall be 95 degrees in the horizontal plane and 45 degrees in the vertical plane. The outside dimensions shall be 28.56 inches high by
21.31inches wide by 17.00 inches deep. The weight shall be 56 pounds. The loud- speaker system shall be a Peavey model Impulse 1015 8 ohm.
CAUTION: Before
attempting to suspend this speaker, consult a certified structural engineer. Speaker can fall from improper suspen- sion, resulting in serious injury and property damage. Do not suspend or mount any product or device from this enclosure! Maximum enclosure angle 45o. Use only the correct mating hardware. All associated rig- ging is the responsibility
of others.
THREE + TWO LIMITED WARRANTY
NOTE: For details, refer to the war- ranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi
Neutrik® & Speakon® are a registered trademark of Neutrik AG.
4