Peavey 112E specifications Classic@, Enclosure, Specifications, Description

Classic@

Enclosure

SPECIFICATIONS

Power Handling:

75 W RMS

Transducer:

One 12” Sheffield@ 1230

Impedance, Z:

16 ohms

Input Connections:

One l/4” phone jack

DESCRIPTION

Offered as a companion enclosure for the Classic 30, the Classic 112E is a closed-back cabinet with a

Sheffield 1230 speaker. The 112E’s

16-ohm impedance makes it compatible with any of the Classic 5Os, Classic 30s etc.

Each enclosure has a detachable back section, the removal of which revoices the cabinet. However, to obtain maximum low-end response and cabinet-induced tone coloration, the back should remain intact.

One particularly good application for this enclosure is in a situation where the room is too small to accommodate two (or four) twelve-inch speakers. In such an environment, the Classic 112E produces a high-volume tone at lower volumes (with cone distortion), because twice as much power is delivered to one twelve-inch speaker, as opposed to dividing the signal between two twelves.