SPECIFICATIONS | VB™ 115 Bass Cabinet |
|
|
Frequency response, 1 meter
55 Hz to 2.8 kHz
Usable Low Frequency
40 Hz
Power handling:
350W RMS
700W program
1400W peak
Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
101 dB SPL (2.00V input)
Transducer complement:
One classic Black Widow® 15” woofer,
Impedance (Z):
8 ohms
Input connections:
One
Enclosure materials and finish:
12 mm Baltic birch plywood finished in black polyurethane Hammer Head™ finish, with a full length cloth grille
Transport provisions:
Steel handles, one on each side
Dimensions (H x W x D):
27.88” x 23.88” x 20.12” 708 mm x 607 mm x 511 mm
Net weight:
71 Lbs. (32.3 kg)
Features:
•15”
•700 watts program power handling
•Vented cabinet for strong powerful bass
•Baltic Birch
•Two 1/4" input jacks, and one
•8 ohm impedance
•Durable black polyurethane Hammer Head™ finish
•Classic black grille cloth and silver piping trim
•Made In USA
Description:
The new VB™ series was designed from the ground up for the serious professional bass player. Voiced for strong bass with a smooth harmonic tone, the versatility and performance
of the VB™ 115 encourages use with any fine bass amp head.
The VB™ 115 is constructed using a premium grade of 12 mm Baltic Birch plywood with extensive internal bracing, and is covered with durable polyurethane Hammer Head™ finish. The cabinet includes a black cloth grille with a wooden plywood frame for that warm musical “tone”.
The 15” Black Widow® bass woofer provides a classic bass tone, with excellent power handling and punch. The vented cabinet provides strong powerful bass, with every note propelled forward into the mix. Inputs include two 1/4" input phone jacks, and one
With a nominal impedance of 8 ohm, and a power handling of 700 watts program and 1400 watts peak, the VB™ 115 can be used in conjunction with almost any sized bass amp head. Be sure to check the amplifier specifications to verify the minimum impedance rating of the amp used to power the VB™ 115.
3 + 2 YEAR LIMITED WARRANTY NOTE:Fordetails,refertothewarranty statement. Copies of this statement may be obtained by contacting Peavey ElectronicsCorporation,P.O.Box2898, Meridian, Mississippi
Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and is applied only to equipment manufactured after 13 August 2005
Peavey Electronics Corporation • 5022
Hartley Peavey Drive • Meridian, MS • 39305
(601)
www.peavey.com ©2010 80305249