Peavey PR®12D

SPECIFICATIONS

ENCLOSURE: Peavey PR 12D (domestic)

FREQUENCY RESPONSE: 47 Hz to 20 kHz

LOW FREQUENCY LIMIT (-3 DB POINT):

36 Hz

USEABLE LOW FREQUENCY LIMIT (-10 DB

POINT):

42 Hz

INTERNAL POWER AMPLIFIERS (@120 VAC LINE):

Woofer - 150 Watts @ less than 0.1% distortion

Tweeter - 70 Watts peak dynamic power 50 Watts @ less than 0.1% distortion.

NOMINAL SENSITIVITY (1W @1M, SWEPT SINE INPUT IN ANECHOIC ENVIRONMENT):

97 dB

MAXIMUM SOUND PRESSURE LEVEL: 120 dB music peak

NOMINAL RADIATION ANGLES: 90˚ horizontal by 40˚ vertical

TRANSDUCER COMPLEMENT:

12" heavy duty woofer and RX14 1.4" titanium diaphragm compression driver tweeter

BOX TUNING FREQUENCY (FBOX):

55 Hz

ELECTROACOUSTIC CROSSOVER

FREQUENCY: 2,000 Hz

CROSSOVER TYPE:

Internal Electronic two-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.

CROSSOVER SLOPES:

18 dB/octave (third order) low pass,

18 dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer.

ELECTRONIC INPUT IMPEDANCE (NOMINAL): 10 k ohms unbalanced, 20 k ohms balanced line level, 2.4 k ohms balanced mic level.

INPUT CONNECTIONS:

One combo female XLR/ 1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced input and output.

ENCLOSURE MATERIALS AND FINISH: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is black.

MOUNTING:

Subwoofer pole-mounting via molded- in mount, flying via Versamount70 and four rubber feet for floor use.

DIMENSIONS:

23.69” (60.2 cm) tall by 17.81”

(45.2 cm) wide {10.00”/25.4 cm in rear} by 13.75” (34.9 cm) deep”

OPTIONAL ACCESSORIES: Impulse® 200 Floor Monitor Kit (FG# 00370480)

NET WEIGHT: 28 lbs.

ADDITIONAL REMARKS:

Also available as a passively crossed- over unit, the Peavey PR 12.

ELECTRONICS AND AMPLIFIER SPECIFICATIONS:

ELECTRONIC INPUT IMPEDANCE (NOMINAL): Primary balanced input: 20 k ohms line level sensitivity selected, 2.4 k ohms mic level sensitivity selected, 10 k ohms unbalanced 1/4".

MIC SWITCH SENSITIVITY INCREASE: 30 dB

INFRASONIC FILTER PROTECTION: 36 dB/octave roll-off

Woofer servo that subtracts error so that the woofer cone follows the drive waveform precisely.

Constant Loudness (Fletcher-Muson) circuit for accenuating bass and treble at low listening volume levels.

NOMINAL AMPLIFIER FREQUENCY RESPONSE: +0, -1 dB from 10 Hz to 30 kHz

HUM AND NOISE:

Greater than 90 dB below rated power

DDT DYNAMIC RANGE:

Greater than 14 dB

THD AND IM:

Typically less than 0.1 %

DAMPING FACTOR:

Greater than 100 @ 1000 Hz, 8 ohms

POWER REQUIREMENTS OF PEAVEY PR12P SYSTEM (DOMESTIC): Nominal 110 watts, 120 VAC, 60 Hz

12

Page 12
Image 12
Peavey 12 D manual Peavey PR12D

12 D specifications

The Peavey 12 D is a versatile and powerful loudspeaker designed to meet the demands of live sound reinforcement and various audio applications. Known for its high performance and reliability, the 12 D is aimed at musicians, DJs, and sound engineers who require quality sound and durability in a portable package.

One of the key features of the Peavey 12 D is its impressive power handling capability. The loudspeaker can handle up to 300 watts of continuous power and peaks at 1200 watts, making it suitable for medium to large venues. This robust power handling allows the speaker to reproduce audio with clarity and impact, ensuring that every note and vocal cut through the mix.

The 12 D employs a 12-inch heavy-duty woofer that provides deep, resonant bass response, ideal for a range of music genres. This is complemented by a high-frequency driver that delivers crystal-clear treble frequencies, allowing for a balanced sound profile. The combination of these components results in a full-range sound that is both vibrant and articulate.

Incorporating advanced technologies, the Peavey 12 D features a constant directivity horn that offers controlled dispersion of sound. This ensures consistent coverage across the audience area, minimizing dead spots and providing an even listening experience. Additionally, the speaker is equipped with Peavey's proprietary EQ settings, allowing users to tailor the sound output to their specific environment or preferences.

Portability and ease of use are also central to the design of the Peavey 12 D. Weighing in at a manageable size and featuring durable enclosures, the speaker is easy to transport and set up. Integrated handles make it convenient for mobile applications, and its rugged construction ensures it can withstand the rigors of touring.

For connectivity, the Peavey 12 D offers versatile input options, allowing for seamless integration into existing sound systems. With all these characteristics combined, the Peavey 12 D stands out as a reliable and powerful choice for anyone looking to elevate their sound experience, whether on stage or at an event. Its combination of performance, technology, and user-friendly features makes it an excellent option for both professionals and enthusiasts alike.