ImpulseTM 1582

MADE IN U.S,A.

A PRODUCT OF PEAVEY ELECTRONICS CORP.

MERIDIAN, MS

MAX POWER: 150W CONT. (34.7V RMS) 300W PROGRAM

IMPEDANCE: 8 OHMS

WEIGHT: 52 LBS.

DANGER: BEFORE ATTEMPTING TO SUSPEND THIS SPEAKER CONSULT A CERTIFIED STRUCTURAL ENGINEER. SPEAKER CAN FALL FROM IMPROPER SUSPENSION, RESULTING IN SERIOUS INJURY AND PROPERTY DAMAGE. OTHER ENCLOSURES MAY BE SUSPENDED BELOW ONE IMPULSE TM 1582. HOWEVER, THE COMBINED WEIGHT OF ADDITIONAL ENCLOSURES AND ALL CABLE, CLAMPS AND OTHER HARDWARE MUST NOT EXCEED 146 POUNDS. THE IMPULSETM 1582 WEIGHS 52 POUNDS. AND THE MAXIMUM COMBINED WEIGHT SUSPENDED

FROM THE UPPERMOST MOUNTING BRACKET ASSEMBLIES MUST NOT EXCEED 200 POUNDS. MAXIMUM ENCLOSURE ANGLE 45. USE ONLY 1/2"FORGED SHOULDER MACHINERY EYE BOLT MIL SPEC MS 51937-5 ALL ASSOCIATED RIGGING IS THE RESPONSIBILTY OF OTHERS

WARNING: THIS SPEAKER SYSTEM CAN PERMANENTLY DAMAGE HEARING! USE EXTREME CARE SETTING MAXIMUM LOUDNESS

FULL RANGE

FOR BI-AMP, REMOVE JUMPERS

-

+

 

10

- + - +

LOWHIGH

BI-AMP INPUT

ImpulseTM 1582

MADE IN U.S,A.

A PRODUCT OF PEAVEY ELECTRONICS CORP.

MERIDIAN, MS

MAX POWER: 150W CONT. (34.7V RMS) 300W PROGRAM

IMPEDANCE: 8 OHMS

WEIGHT: 52 LBS.

DANGER: BEFORE ATTEMPTING TO SUSPEND THIS SPEAKER CONSULT A CERTIFIED STRUCTURAL ENGINEER. SPEAKER CAN FALL FROM IMPROPER SUSPENSION, RESULTING IN SERIOUS INJURY AND PROPERTY DAMAGE. OTHER ENCLOSURES MAY BE SUSPENDED BELOW ONE IMPULSE TM 1582. HOWEVER, THE COMBINED WEIGHT OF ADDITIONAL ENCLOSURES AND ALL CABLE, CLAMPS AND OTHER HARDWARE MUST NOT EXCEED 146 POUNDS. THE IMPULSETM 1582 WEIGHS 52 POUNDS. AND THE MAXIMUM COMBINED WEIGHT SUSPENDED

FROM THE UPPERMOST MOUNTING BRACKET ASSEMBLIES MUST NOT EXCEED 200 POUNDS. MAXIMUM ENCLOSURE ANGLE 45. USE ONLY 1/2"FORGED SHOULDER MACHINERY EYE BOLT MIL SPEC MS 51937-5 ALL ASSOCIATED RIGGING IS THE RESPONSIBILTY OF OTHERS

WARNING: THIS SPEAKER SYSTEM CAN PERMANENTLY DAMAGE HEARING! USE EXTREME CARE SETTING MAXIMUM LOUDNESS

FULL RANGE

FOR BI-AMP, REMOVE JUMPERS

-

+

 

- + - +

LOW HIGH

Full Range

Jumpers must be closed across terminal strips.

Low High

Bi-Amp

Jumpers must be open across terminal strips.

Page 10
Image 10
Peavey 1582 specifications ImpulseTM