Peavey 31FX owner manual Specifications

SPECIFICATIONS

Frequency Response: +/- 1 dB 20 Hz to 20 kHz

Distortion:

.005% 20 Hz-20 kHz

Input Impedance:

Balanced 20 k Ohms (Equal impedance to ground)

Output Impedance:

330 Ohms

Maximum Input Level:

+21 dBu (8.6 V RMS)

Maximum Output Level:

+27 dBu (17 V RMS)

Nominal Input Level:

0 dBV (1 V RMS)

Nominal Output Level:

0 dBV (1 V RMS)

Input Headroom:

Nominal 21 dBu

Output Headroom: 27 dBu

Output Noise:

EQ in bypass: -101 dBV

EQ in, all flat: -95 dBV

Filter Frequencies:

20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1 k,

1.25k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k,

6.3k, 8 k, 10 k, 12.5 k, 16 k, and 20 kHz

Filter Q:

4.77

Maximum Boost and Cut Filter:

+/- 15 dB

Maximum Boost and Cut Gain (WideBand Gain):

+/- 15 dB

Low Cut Filter:

12 dB Per Octave

Frequency:

Min: 5 Hz

Max: 200 Hz

High Cut Filter:

12 dB Per Octave

Frequency:

Min: 5 kHz

Max: 35 kHz

All specifications are typical unless otherwise noted. 0 dBV=1 Volt. All specifications are referenced to nominal output level (0 dBV) unless otherwise stated. All measurements are wideband 20 Hz to 20 kHz unless otherwise stated. NOTE: All specs measured at 1V RMS input and unbalanced output. All sliders at mid position, all switches out unless otherwise noted. Due to our efforts for constant improvement, features and specifications listed herein are subject to change without notice.

6