IPR™ 1600 Specification Sheet

Rated Power (2 x 2 ohms)

- 800 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.

Rated Power (2 x 4 ohms)

- 530 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.

Rated Power (2 x 8 ohms)

- 300 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.

Rated Power (1 x 2 ohms)

- 1000 watts @ 1 kHz at <0.1% T.H.D.

Rated Power (1 x 4 ohms)

- 600 watts @ 1 kHz at <0.1% T.H.D.

Rated Power (1 x 8 ohms)

- 320 watts @ 1 kHz at <0.1% T.H.D.

Minimum Load Impedance

- 2 ohms

Maximum RMS Voltage Swing

- 55 volts

Frequency Response

- 10 Hz - 50 kHz; +0, -3 dB at 1 watt

T.H.D. (2 x 2 ohms)

- <0.1% @ 600 watts per channel from 20 Hz to 1.5 kHz, decreasing to 500 watts at 20 kHz at <0.25%

T.H.D. (2 x 4 ohms)

- <0.1% @ 470 watts per channel from 20 Hz to 20 kHz

T.H.D. (2 x 8 ohms)

- <0.1% @ 250 watts per channel from 20 Hz to 20 kHz

Input CMRR

- > - 60 dB @ 1 kHz

Voltage Gain

- x 60 (+35 dB)

Crossover

- 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel

Crosstalk

- > -70 dB @ 1 kHz at 100 watts power @ 4 ohms

Hum and Noise

- > -105 dB, "A" weighted referenced to rated power @ 4 ohms

Damping Factor (8 ohms)

- > 170:1 @ 20 Hz - 1 kHz at 8 ohms

Phase Response

- +9 to - 86 degrees from 20 Hz to 20kHz

Slew Rate:

- > 12V/us

Input Sensitivity

- .775 volts +/- 3% for 1 kHz 4 ohm rated power, .68 volts +/- 3% for 1 kHz. 2 ohm rated power

Input Impedance

- 15k ohms, balanced and 7.5k ohms unbalanced.

Current Draw @ 1/8 power

- 550 watts @ 2 ohms, 390 watts @ 4 ohms, 250 watts @ 8 ohms

Current Draw @ 1/3 power

-1,160 watts @ 2 ohms, 810 watts @ 4 ohms, 460 watts @ 8 ohms

Cooling

- Temperature dependent variable speed 80 mm DC fan

Controls

- 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F.

Indicator LEDs

- 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect

Protection

- Thermal, DC, subsonic, incorrect loads, under and over voltage

Connectors

- Inputs: Dual Combi 1/4” XLR, Outputs: Dual 1/4” signal patch, dual Speakon connectors

Construction

- 0.062” thick aluminum

Dimensions

- 3.5”x19” x 10.5” behind front panel + 0.6” for handle

Dimensions Packed

- 4.72” x20.8” x 12.44” (120mm x 530mm x 316mm)

Net Weight*

- 3.23 kg (7.125 lbs.)

Gross Weight

- 4.31 kg (9.5 lbs.)

Warranty

- 5 years

Rated power readings made with BW: <10 Hz to 22 kHz. All power measurements made at 120 VAC and 240VAC. 2 ohm power is time limited by circuit breaker.

*Net Weight does not include power cord.

22

Page 21 Page 23
Page 22
Image 22
Peavey 4500, 6000, 3000 manual IPR 1600 Specification Sheet
Page 21 Page 23

1600, 4500, 6000, 3000 specifications

The Peavey 3000 is an esteemed model in the realm of musical amplifiers, known for its performance, reliability, and innovative features geared towards musicians who demand high quality and versatility on stage and in the studio.

One of the primary features of the Peavey 3000 is its impressive power capacity. With a robust output, it delivers strong, clear sound, capable of driving large speaker systems without breaking a sweat. This amplifier excels in various musical scenarios, from intimate gigs to full-scale concerts, making it a favorite for both amateur and professional musicians alike.

The 3000 integrates cutting-edge technology that sets it apart. Among its notable advancements is the built-in digital signal processing (DSP), which offers musicians a host of effects and tonal shaping options. This flexibility allows users to customize their sound according to their preferences, enabling them to achieve everything from subtle adjustments to dramatic effects, all accessible through an intuitive interface.

Another hallmark of the Peavey 3000 is its lightweight and portable design. Weighing significantly less than many of its counterparts, this model is designed with the touring musician in mind, ensuring ease of transport without compromising on sound quality. It features a rugged casing that can withstand the rigors of traveling, making it ideal for performers who are frequently on the road.

The amplifier is also equipped with a comprehensive array of connectivity options. The inclusion of multiple inputs and outputs offers enhanced compatibility with various instruments and additional equipment, providing musicians the freedom to expand their setups. This level of connectivity means the Peavey 3000 can serve as the central hub for a complete audio rig.

Furthermore, reliability is a key characteristic of the Peavey 3000. Built with high-quality components, it’s designed to endure long sessions without overheating or faltering. Musicians can depend on consistent performance during high-energy performances, which is crucial for maintaining creative flow.

Overall, the Peavey 3000 stands out as an exceptional amplifier, combining power, flexibility, and reliability. Whether used by guitarists, keyboardists, or vocalists, it offers the features that modern musicians require to effectively translate their artistic vision into live performance. The Peavey 3000 continues to be a trusted choice for those seeking to elevate their sound to new heights.
Top Page Image Contents