Peavey 6X specifications Usable low frequency limit -10 dB point, Power handling, Impedance Z

SP E PA V E Y EE L E C CT R O N ISC S

SP™ 6X

SPECIFICATIONS

Frequency response, 1 meter on-axis, swept-sine in anechoic environment:

70 Hz - 17 kHz (±3 dB)

Usable low frequency limit (-10 dB point):

55 Hz

Power handling:

Full Range:

250 W continuous

500 W program

1000 W peak

Sound pressure level, 1 Watt,

1 meter in anechoic environment:

Full Range:

97.0 dB SPL, (2.83 V input)

Maximum sound pressure level (1 meter):

Full Range:

121.0dB SPL continuous

127.0dB SPL peak

Transducer complement:

Low Frequency Section: 1x 12 in woofer, vented SH12862

High Frequency Section:

1x .875 in. exit/50 mm RX™ 22 voice coil compression driver on CH® 3 horn with Sound Guard™ III

Box tuning frequency:

Low Frequency Section:

51 Hz

Crossover frequency (internal passive):

Low Frequency - High Frequency:

2.9 kHz

Impedance (Z):

Full Range:
Nominal:	8.0 Ω
Minimum:	6.1 Ω

Input connections:

2x 1/4 inch phone jacks

Enclosure materials and finish:

3/4" novaply covered with a duarable wear resistant black carpet

Mounting provisions:

This unit is not designed for overhead suspension.

Dimensions (H x W x D):

Front:

28.00in. x 18.94 in. x 18.31 in. 711 mm x 481 mm x 465 mm

Rear:

28.00in. x 13.00 in. x 18.31 in. 711 mm x 330 mm x 465 mm

Net weight:

67 lbs. (30.5 kg)

Features:

•SH 12862 12" Sheffield® woofer

•RX22 compression driver

•CH® 3 constant directivity horn

•Sound Guard™ III high-frequency protection circuit

•SA-1™stand adaptor

Description:

The latest version of the SP 6X has the new RX 22 high frequency compression driver incorporated, as well as a very nice looking cabinet design. The SP 6X is a two-way speaker system comprised of a 12" Sheffield® woofer and an RX 22 compression driver loaded onto a CH®3 constant directivity horn.

The SP™ 6X has a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range colorations due to the cabinet. It is constructed of 1/4" high density particle board and is covered with a durable black carpet. The enclosure corners are reinforced with polymer caps, and a black powder-coated expanded metal grille covers the lower half of the system to protect the woofer from external damage. An SA-1 stand mount adaptor is built-in for ease of speaker stand use.